Sep 09, 2022
| STANDARD | TITLE | TYPE | DATE |
|---|---|---|---|
| EN ISO 12100:2010 | Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010) | A - | 01/01/2021 |
| EN 349:1993+A1:2008 | Safety of machinery - Minimum gaps to avoid crushing of parts of the human body | B - | 01/01/2021 |
| EN 547-1:1996+A1:2008 | Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery | B - | 01/01/2021 |
| EN 547-2:1996+A1:2008 | Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings | B - | 01/01/2021 |
| EN 547-3:1996+A1:2008 | Safety of machinery - Human body measurements - Part 3: Anthropometric data | B - | 01/01/2021 |
| EN 574:1996+A1:2008 | Safety of machinery - Two-hand control devices - Functional aspects - Principles for design | B - | 01/01/2021 |
| EN 614-1:2006+A1:2009 | Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles | B - | 01/01/2021 |
| EN 614-2:2000+A1:2008 | Safety of machinery - Ergonomic design principles - Part 2: Interactions between the design of machinery and work tasks | B - | 01/01/2021 |
| EN 842:1996+A1:2008 | Safety of machinery - Visual danger signals - General requirements, design and testing | B - | 01/01/2021 |
| EN 894-1:1997+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators | B - | 01/01/2021 |
| EN 894-2:1997+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays | B - | 01/01/2021 |
| EN 894-3:2000+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators | B - | 01/01/2021 |
| EN 894-4:2010 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 4: Location and arrangement of displays and control actuators | B - | 01/01/2021 |
| EN 981:1996+A1:2008 | Safety of machinery - System of auditory and visual danger and information signals | B - | 01/01/2021 |
| EN 1005-1:2001+A1:2008 | Safety of machinery - Human physical performance - Part 1: Terms and definitions | B - | 01/01/2021 |
| EN 1005-2:2003+A1:2008 | Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery | B - | 01/01/2021 |
| EN 1005-3:2002+A1:2008 | Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation | B - | 01/01/2021 |
| EN 1005-4:2005+A1:2008 | Safety of machinery - Human physical performance - Part 4: Evaluation of working postures and movements in relation to machinery | B - | 01/01/2021 |
| EN 1032:2003+A1:2008 | Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value | B - | 01/01/2021 |
| EN 1093-1:2008 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods | B - | 01/01/2021 |
| EN 1093-2:2006+A1:2008 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant | B - | 01/01/2021 |
| EN 1093-3:2006+A1:2008 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Test bench method for the measurement of the emission rate of a given pollutant | B - | 01/01/2021 |
| EN 1093-4:1996+A1:2008 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4: Capture efficiency of an exhaust system - Tracer method | B - | 01/01/2021 |
| EN 1093-6:1998+A1:2008 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Separation efficiency by mass, unducted outlet | B - | 01/01/2021 |
| EN 1093-7:1998+A1:2008 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7: Separation efficiency by mass, ducted outlet | B - | 01/01/2021 |
| EN 1093-8:1998+A1:2008 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 8: Pollutant concentration parameter, test bench method | B - | 01/01/2021 |
| EN 1093-9:1998+A1:2008 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 9: Pollutant concentration parameter, room method | B - | 01/01/2021 |
| EN 1093-11:2001+A1:2008 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 11: Decontamination index | B - | 01/01/2021 |
| EN 1127-1:2011 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology | B - | 01/01/2021 |
| EN 1127-1:2019 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology | B - | 01/01/2021 |
| EN 1127-2:2014 | Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining | B - | 01/01/2021 |
| EN 1299:1997+A1:2008 | Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation | B - | 01/01/2021 |
| EN 1837:1999+A1:2009 | Safety of machinery - Integral lighting of machines | B - | 01/01/2021 |
| EN 1837:2020 | Safety of machinery - Integral lighting of machines | B - | 04/07/2022 |
| EN ISO 3741:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms (ISO 3741:2010) | B - | 01/01/2021 |
| EN ISO 3743-1:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010) | B - | 01/01/2021 |
| EN ISO 3743-2:2009 | Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994) | B - | 01/01/2021 |
| EN ISO 3743-2:2019 | Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:2018) |
B - | 23/09/2021 |
| EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) | B - | 01/01/2021 |
| EN ISO 3745:2012, EN ISO 3745:2012/A1:2017 |
Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi-anechoic rooms (ISO 3745:2012) | B - | 01/01/2021 |
| EN ISO 3746:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010) | B - | 01/01/2021 |
| EN ISO 3747:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment (ISO 3747:2010) | B - | 01/01/2021 |
| EN ISO 4413:2010 | Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010) | B - | 01/01/2021 |
| EN ISO 4414:2010 | Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010) | B - | 01/01/2021 |
| EN ISO 4871:2009 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) | B - | 01/01/2021 |
| EN ISO 5136:2009 | Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003) | B - | 01/01/2021 |
| EN ISO 7235:2009 | Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003) | B - | 01/01/2021 |
| EN ISO 7731:2008 | Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:2003) | B - | 01/01/2021 |
| EN ISO 9614-1:2009 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993) | B - | 01/01/2021 |
| EN ISO 9614-3:2009 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002) | B - | 01/01/2021 |
| EN ISO 10326-1:2016 | Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements (ISO 10326-1:2016, Corrected version 2017-02) | B - | 01/01/2021 |
| EN ISO 11161:2007, EN ISO 11161:2007/A1:2010 |
Safety of machinery - Integrated manufacturing systems - Basic requirements (ISO 11161:2007) | B - | 01/01/2021 |
| EN ISO 11201:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) | B - | 01/01/2021 |
| EN ISO 11202:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010) | B - | 01/01/2021 |
| EN ISO 11202:2010, EN ISO 11202:2010/A1:2021 |
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010) | B - | 06/08/2022 |
| EN ISO 11203:2009 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995) | B - | 01/01/2021 |
| EN ISO 11203:2009, EN ISO 11203:2009/A1:2020 |
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995) | B - | 23/09/2021 |
| EN ISO 11204:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010) | B - | 01/01/2021 |
| EN ISO 11205:2009 | Acoustics - Noise emitted by machinery and equipment - Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity (ISO 11205:2003) | B - | 01/01/2021 |
| EN ISO 11546-1:2009 | Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995) | B - | 01/01/2021 |
| EN ISO 11546-2:2009 | Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995) | B - | 01/01/2021 |
| EN ISO 11688-1:2009 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) | B - | 01/01/2021 |
| EN ISO 11691:2009 | Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:1995) | B - | 01/01/2021 |
| EN ISO 11957:2009 | Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements (ISO 11957:1996) | B - | 01/01/2021 |
| EN 12198-1:2000+A1:2008 | Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 1: General principles | B - | 01/01/2021 |
| EN 12198-2:2002+A1:2008 | Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 2: Radiation emission measurement procedure | B - | 01/01/2021 |
| EN 12198-3:2002+A1:2008 | Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 3: Reduction of radiation by attenuation or screening | B - | 01/01/2021 |
| EN 12254:2010, EN 12254:2010/AC:2011 |
Screens for laser working places - Safety requirements and testing | B - | 01/01/2021 |
| EN 12786:2013 | Safety of machinery - Requirements for the drafting of the vibration clauses of safety standards | B - | 01/01/2021 |
| EN 13490:2001+A1:2008 | Mechanical vibration - Industrial trucks - Laboratory evaluation and specification of operator seat vibration | B - | 01/01/2021 |
| EN ISO 13732-1:2008 | Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) | B - | 01/01/2021 |
| EN ISO 13732-3:2008 | Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 3: Cold surfaces (ISO 13732-3:2005) | B - | 01/01/2021 |
| EN ISO 13753:2008 | Mechanical vibration and shock - Hand-arm vibration - Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system (ISO 13753:1998) | B - | 01/01/2021 |
| EN ISO 13849-1:2015 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) | B - | 01/01/2021 |
| EN ISO 13849-2:2012 | Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2012) | B - | 01/01/2021 |
| EN ISO 13850:2015 | Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015) | B - | 01/01/2021 |
| EN ISO 13851:2019 | Safety of machinery - Two-hand control devices - Principles for design and selection (ISO 13851:2019) | B - | 23/09/2021 |
| EN ISO 13854:2019 | Safety of machinery - Minimum gaps to avoid crushing of parts of the human body (ISO 13854:2017) | B - | 23/09/2021 |
| EN ISO 13855:2010 | Safety of machinery - Positioning of safeguards with respect to the approach speeds of parts of the human body (ISO 13855:2010) | B - | 01/01/2021 |
| EN ISO 13856-1:2013 | Safety of machinery - Pressure-sensitive protective devices - Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors (ISO 13856-1:2013) | B - | 01/01/2021 |
| EN ISO 13856-2:2013 | Safety of machinery - Pressure-sensitive protective devices - Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars (ISO 13856-2:2013) | B - | 01/01/2021 |
| EN ISO 13856-3:2013 | Safety of machinery - Pressure-sensitive protective devices - Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices (ISO 13856-3:2013) | B - | 01/01/2021 |
| EN ISO 13857:2008 | Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) | B - | 01/01/2021 |
| EN ISO 13857:2019 | Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2019) | B - | 23/09/2021 |
| EN ISO 14118:2018 | Safety of machinery - Prevention of unexpected start-up (ISO 14118:2017) | B - | 01/01/2021 |
| EN ISO 14119:2013 | Safety of machinery - Interlocking devices associated with guards - Principles for design and selection (ISO 14119:2013) | B - | 01/01/2021 |
| EN ISO 14120:2015 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards (ISO 14120:2015) | B - | 01/01/2021 |
| EN ISO 14122-1:2016 | Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means and general requirements of access (ISO 14122-1:2016) | B - | 01/01/2021 |
| EN ISO 14122-2:2016 | Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2016) | B - | 01/01/2021 |
| EN ISO 14122-3:2016 | Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2016) | B - | 01/01/2021 |
| EN ISO 14122-4:2016 | Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2016) | B - | 01/01/2021 |
| EN ISO 14123-1:2015 | Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers (ISO 14123-1:2015) | B - | 01/01/2021 |
| EN ISO 14123-2:2015 | Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures (ISO 14123-2:2015) | B - | 01/01/2021 |
| EN ISO 14159:2008 | Safety of machinery - Hygiene requirements for the design of machinery (ISO 14159:2002) | B - | 01/01/2021 |
| EN ISO 14738:2008 | Safety of machinery - Anthropometric requirements for the design of workstations at machinery (ISO 14738:2002, including Cor 1:2003 and Cor 2:2005) | B - | 01/01/2021 |
| EN ISO 15536-1:2008 | Ergonomics - Computer manikins and body templates - Part 1: General requirements (ISO 15536-1:2005) | B - | 01/01/2021 |
| EN 15967:2011 | Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours | B - | 01/01/2021 |
| EN 16590-1:2014 | Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 1: General principles for design and development (ISO 25119-1:2010 modified) | B - | 01/01/2021 |
| EN 16590-2:2014 | Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 2: Concept phase (ISO 25119-2:2010 modified) | B - | 01/01/2021 |
| EN ISO 18497:2018 | Agricultural machinery and tractors - Safety of highly automated agricultural machines - Principles for design (ISO 18497:2018) | B - | 01/01/2021 |
| EN ISO 19353:2016 | Safety of machinery - Fire prevention and fire protection (ISO 19353:2015) | B - | 01/01/2021 |
| EN ISO 19353:2019 | Safety of machinery - Fire prevention and fire protection (ISO 19353:2019) | B - | 01/01/2021 |
| EN ISO 20607:2019 | Safety of machinery - Instruction handbook - General drafting principles (ISO 20607:2019) | B - | 01/01/2021 |
| EN ISO 20643:2008, EN ISO 20643:2008/A1:2012 |
Mechanical vibration - Hand-held and hand-guided machinery - Principles for evaluation of vibration emission (ISO 20643:2005) | B - | 01/01/2021 |
| EN 81-3:2000+A1:2008, EN 81-3:2000+A1:2008/AC:2009 |
Safety rules for the construction and installation of lifts - Part 3: Electric and hydraulic service lifts | C - | 01/01/2021 |
| EN 81-31:2010 | Safety rules for the construction and installation of lifts - Lifts for the transport of goods only - Part 31: Accessible goods only lifts | C - | 01/01/2021 |
| EN 81-40:2008 | Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 40: Stairlifts and inclined lifting platforms intended for persons with impaired mobility | C - | 01/01/2021 |
| EN 81-40:2020 | Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 40: Stairlifts and inclined lifting platforms intended for persons with impaired mobility |
C - | 04/07/2022 |
| EN 81-41:2010 | Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility | C - | 01/01/2021 |
| EN 81-43:2009 | Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 43: Lifts for cranes | C - | 01/01/2021 |
| EN 115-1:2017 | Safety of escalators and moving walks - Part 1: Construction and installation | C - | 01/01/2021 |
| EN 201:2009 | Plastics and rubber machines - Injection moulding machines - Safety requirements | C - | 01/01/2021 |
| EN 267:2009+A1:2011 | Automatic forced draught burners for liquid fuels | C - | 01/01/2021 |
| EN 280:2013+A1:2015 | Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests | C - | 01/01/2021 |
| EN 289:2014 | Plastics and rubber machines - Compression moulding machines and transfer moulding machines - Safety requirements | C - | 01/01/2021 |
| EN 303-5:2012 | Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking | C - | 01/01/2021 |
| EN 303-5:2021 | Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking | C - | 06/08/2022 |
| EN 378-2:2016 | Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation | C - | 01/01/2021 |
| EN 415-1:2014 | Safety of packaging machines - Part 1: Terminology and classification of packaging machines and associated equipment | C - | 01/01/2021 |
| EN 415-3:1999+A1:2009 | Safety of packaging machines - Part 3: Form, fill and seal machines | C - | 01/01/2021 |
| EN 415-5:2006+A1:2009 | Safety of packaging machines - Part 5: Wrapping machines | C - | 01/01/2021 |
| EN 415-6:2013 | Safety of packaging machines - Part 6: Pallet wrapping machines | C - | 01/01/2021 |
| EN 415-7:2006+A1:2008 | Safety of packaging machines - Part 7: Group and secondary packaging machines | C - | 01/01/2021 |
| EN 415-8:2008 | Safety of packaging machines - Part 8: Strapping machines | C - | 01/01/2021 |
| EN 415-9:2009 | Safety of packaging machines - Part 9: Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3 | C - | 01/01/2021 |
| EN 415-10:2014 | Safety of packaging machines - Part 10: General Requirements | C - | 01/01/2021 |
| EN 422:2009 | Plastics and rubber machines - Blow moulding machines - Safety requirements | C - | 01/01/2021 |
| EN 453:2014 | Food processing machinery - Dough mixers - Safety and hygiene requirements | C - | 01/01/2021 |
| EN 454:2014 | Food processing machinery - Planetary mixers - Safety and hygiene requirements | C - | 01/01/2021 |
| EN 474-1:2006+A5:2018 | Earth-moving machinery - Safety - Part 1: General requirements | C - | 01/01/2021 |
| EN 474-1:2006+A6:2019 | Earth-moving machinery - Safety - Part 1: General requirements | C - | 06/08/2022 |
| EN 474-2:2006+A1:2008 | Earth-moving machinery - Safety - Part 2: Requirements for tractor-dozers | C - | 01/01/2021 |
| EN 474-3:2006+A1:2009 | Earth-moving machinery - Safety - Part 3: Requirements for loaders | C - | 01/01/2021 |
| EN 474-4:2006+A2:2012 | Earth-moving machinery - Safety - Part 4: Requirements for backhoe loaders | C - | 01/01/2021 |
| EN 474-5:2006+A3:2013 | Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators | C - | 01/01/2021 |
| EN 474-6:2006+A1:2009 | Earth-moving machinery - Safety - Part 6: Requirements for dumpers | C - | 01/01/2021 |
| EN 474-7:2006+A1:2009 | Earth-moving machinery - Safety - Part 7: Requirements for scrapers | C - | 01/01/2021 |
| EN 474-8:2006+A1:2009 | Earth-moving machinery - Safety - Part 8: Requirements for graders | C - | 01/01/2021 |
| EN 474-9:2006+A1:2009 | Earth-moving machinery - Safety - Part 9: Requirements for pipelayers | C - | 01/01/2021 |
| EN 474-10:2006+A1:2009 | Earth-moving machinery - Safety - Part 10: Requirements for trenchers | C - | 01/01/2021 |
| EN 474-11:2006+A1:2008 | Earth-moving machinery - Safety - Part 11: Requirements for earth and landfill compactors | C - | 01/01/2021 |
| EN 474-12:2006+A1:2008 | Earth-moving machinery - Safety - Part 12: Requirements for cable excavators | C - | 01/01/2021 |
| EN 500-1:2006+A1:2009 | Mobile road construction machinery - Safety - Part 1: Common requirements | C - | 01/01/2021 |
| EN 500-2:2006+A1:2008 | Mobile road construction machinery - Safety - Part 2: Specific requirements for road-milling machines | C - | 01/01/2021 |
| EN 500-3:2006+A1:2008 | Mobile road construction machinery - Safety - Part 3: Specific requirements for soil-stabilising machines and recycling machines | C - | 01/01/2021 |
| EN 500-4:2011 | Mobile road construction machinery - Safety - Part 4: Specific requirements for compaction machines | C - | 01/01/2021 |
| EN 500-6:2006+A1:2008 | Mobile road construction machinery - Safety - Part 6: Specific requirements for paver-finishers | C - | 01/01/2021 |
| EN 528:2008 | Rail dependent storage and retrieval equipment - Safety requirements | C - | 01/01/2021 |
| EN 536:2015 | Road construction machines - Mixing plants for road construction materials - Safety requirements | C - | 01/01/2021 |
| EN 609-1:2017 | Agricultural and forestry machinery - Safety of log splitters - Part 1: Wedge splitters | C - | 01/01/2021 |
| EN 609-2:1999+A1:2009 | Agricultural and forestry machinery - Safety of log splitters - Part 2: Screw splitters | C - | 01/01/2021 |
| EN 617:2001+A1:2010 | Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers | C - | 01/01/2021 |
| EN 618:2002+A1:2010 | Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors | C - | 01/01/2021 |
| EN 619:2002+A1:2010 | Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads | C - | 01/01/2021 |
| EN 620:2002+A1:2010 | Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials | C - | 01/01/2021 |
| EN 676:2003+A2:2008, EN 676:2003+A2:2008/AC:2008 |
Automatic forced draught burners for gaseous fuels | C - | 01/01/2021 |
| EN 690:2013 | Agricultural machinery - Manure spreaders - Safety | C - | 01/01/2021 |
| EN 692:2005+A1:2009 | Machine tools - Mechanical presses - Safety | C - | 01/01/2021 |
| EN 693:2001+A2:2011 | Machine tools - Safety - Hydraulic presses | C - | 01/01/2021 |
| EN 703:2004+A1:2009 | Agricultural machinery - Silage loading, mixing and/or chopping and distributing machines - Safety | C - | 01/01/2021 |
| EN 706:1996+A1:2009 | Agricultural machinery - Vine shoot tipping machines - Safety | C - | 01/01/2021 |
| EN 707:2018 | Agricultural machinery - Slurry tankers - Safety | C - | 01/01/2021 |
| EN 707:1999+A1:2009 | Agricultural machinery - Slurry tankers - Safety | C - | 01/01/2021 |
| EN 709:1997+A4:2009, EN 709:1997+A4:2009/AC:2012 |
Agricultural and forestry machinery - Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) - Safety | C - | 01/01/2021 |
| EN 710:1997+A1:2010, EN 710:1997+A1:2010/AC:2012 |
Safety requirements for foundry moulding and coremaking machinery and plant associated equipment | C - | 01/01/2021 |
| EN 741:2000+A1:2010 | Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials | C - | 01/01/2021 |
| EN 746-1:1997+A1:2009 | Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment | C - | 01/01/2021 |
| EN 746-2:2010 | Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems | C - | 01/01/2021 |
| EN 746-3:1997+A1:2009 | Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases | C - | 01/01/2021 |
| EN 792-13:2000+A1:2008 | Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools | C - | 01/01/2021 |
| EN 809:1998+A1:2009, EN 809:1998+A1:2009/AC:2010 |
Pumps and pump units for liquids - Common safety requirements | C - | 01/01/2021 |
| EN 818-1:1996+A1:2008 | Short link chain for lifting purposes - Safety - Part 1: General conditions of acceptance | C - | 01/01/2021 |
| EN 818-2:1996+A1:2008 | Short link chain for lifting purposes - Safety - Part 2: Medium tolerance chain for chain slings - Grade 8 | C - | 01/01/2021 |
| EN 818-3:1999+A1:2008 | Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain slings - Grade 4 | C - | 01/01/2021 |
| EN 818-4:1996+A1:2008 | Short link chain for lifting purposes - Safety - Part 4: Chain slings - Grade 8 | C - | 01/01/2021 |
| EN 818-5:1999+A1:2008 | Short link chain for lifting purposes - Safety - Part 5: Chain slings - Grade 4 | C - | 01/01/2021 |
| EN 818-6:2000+A1:2008 | Short link chain for lifting purposes - Safety - Part 6: Chain slings - Specification for information for use and maintenance to be provided by the manufacturer | C - | 01/01/2021 |
| EN 818-7:2002+A1:2008 | Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT) | C - | 01/01/2021 |
| EN 848-2:2007+A2:2012 | Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle hand fed/integrated fed routing machines | C - | 01/01/2021 |
| EN 848-3:2012 | Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerically controlled (NC) boring and routing machines | C - | 01/01/2021 |
| EN 859:2007+A2:2012 | Safety of woodworking machines - Hand fed surface planing machines | C - | 01/01/2021 |
| EN 860:2007+A2:2012 | Safety of woodworking machines - One side thickness planing machines | C - | 01/01/2021 |
| EN 861:2007+A2:2012 | Safety of woodworking machines - Surface planing and thicknessing machines | C - | 01/01/2021 |
| EN 869:2006+A1:2009 | Safety of machinery - Safety requirements for pressure metal diecasting units | C - | 01/01/2021 |
| EN 908:1999+A1:2009 | Agricultural and forestry machinery - Reel machines for irrigation - Safety | C - | 01/01/2021 |
| EN 909:1998+A1:2009 | Agricultural and forestry machinery - Centre pivot and moving lateral types irrigation machines - Safety | C - | 01/01/2021 |
| EN 930:1997+A2:2009 | Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements | C - | 01/01/2021 |
| EN 931:1997+A2:2009 | Footwear manufacturing machines - Lasting machines - Safety requirements | C - | 01/01/2021 |
| EN 940:2009+A1:2012 | Safety of woodworking machines - Combined woodworking machines | C - | 01/01/2021 |
| EN 957-6:2010+A1:2014 | Stationary training equipment - Part 6: Treadmills, additional specific safety requirements and test methods | C - | 01/01/2021 |
| EN 972:1998+A1:2010, EN 972:1998+A1:2010/AC:2011 |
Tannery machines - Reciprocating roller machines - Safety requirements | C - | 01/01/2021 |
| EN 1010-1:2004+A1:2010 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements | C - | 01/01/2021 |
| EN 1010-2:2006+A1:2010 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery | C - | 01/01/2021 |
| EN 1010-3:2002+A1:2009 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 3: Cutting machines | C - | 01/01/2021 |
| EN 1010-4:2004+A1:2009 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines | C - | 01/01/2021 |
| EN 1012-1:2010 | Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors | C - | 01/01/2021 |
| EN 1012-2:1996+A1:2009 | Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps | C - | 01/01/2021 |
| EN 1012-3:2013 | Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors | C - | 01/01/2021 |
| EN 1028-1:2002+A1:2008 | Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1: Classification - General and safety requirements | C - | 01/01/2021 |
| EN 1028-2:2002+A1:2008 | Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 2: Verification of general and safety requirements | C - | 01/01/2021 |
| EN 1034-1:2000+A1:2010 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements | C - | 01/01/2021 |
| EN 1034-2:2005+A1:2009 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums | C - | 01/01/2021 |
| EN 1034-3:2011 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Rereelers and winders | C - | 01/01/2021 |
| EN 1034-4:2005+A1:2009 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities | C - | 01/01/2021 |
| EN 1034-5:2005+A1:2009 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5: Sheeters | C - | 01/01/2021 |
| EN 1034-6:2005+A1:2009 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender | C - | 01/01/2021 |
| EN 1034-7:2005+A1:2009 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 7: Chests | C - | 01/01/2021 |
| EN 1034-8:2012 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 8: Refining plants | C - | 01/01/2021 |
| EN 1034-13:2005+A1:2009 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 13: Machines for de-wiring bales and units | C - | 01/01/2021 |
| EN 1034-14:2005+A1:2009 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 14: Reel splitter | C - | 01/01/2021 |
| EN 1034-16:2012 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 16: Paper and board making machines | C - | 01/01/2021 |
| EN 1034-17:2012 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 17: Tissue making machines | C - | 01/01/2021 |
| EN 1034-21:2012 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 21: Coating machines | C - | 01/01/2021 |
| EN 1034-22:2005+A1:2009 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 22: Wood Grinders | C - | 01/01/2021 |
| EN 1034-26:2012 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 26: Roll packaging machines | C - | 01/01/2021 |
| EN 1034-27:2012 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 27: Roll handling systems | C - | 01/01/2021 |
| EN 1114-1:2011 | Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders | C - | 01/01/2021 |
| EN 1114-3:2019 | Plastics and rubber machines - Extruders and extrusion lines - Part 3: Safety requirements for haul-offs | C - | 01/01/2021 |
| EN 1114-3:2001+A1:2008 | Plastics and rubber machines - Extruders and extrusion lines - Part 3: Safety requirements for haul-offs | C - | 01/01/2021 |
| EN 1175:2020 | Safety of industrial trucks - Electrical/electronic requirements |
C - | 04/07/2022 |
| EN 1175-1:1998+A1:2010 | Safety of industrial trucks - Electrical requirements - Part 1: General requirements for battery powered trucks | C - | 01/01/2021 |
| EN 1175-2:1998+A1:2010 | Safety of industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion engine powered trucks | C - | 01/01/2021 |
| EN 1175-3:1998+A1:2010 | Safety of industrial trucks - Electrical requirements - Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks | C - | 01/01/2021 |
| EN 1218-1:1999+A1:2009 | Safety of woodworking machines - Tenoning machines - Part 1: Single end tenoning machines with sliding table | C - | 01/01/2021 |
| EN 1218-2:2004+A1:2009 | Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or profiling machines fed by chain or chains | C - | 01/01/2021 |
| EN 1218-3:2001+A1:2009 | Safety of woodworking machines - Tenoning machines - Part 3: Hand fed tenoning machines with sliding table for cutting structural timbers | C - | 01/01/2021 |
| EN 1218-5:2004+A1:2009 | Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines with fixed table and feed rollers or feed chain | C - | 01/01/2021 |
| EN 1247:2004+A1:2010 | Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continuous casting machines | C - | 01/01/2021 |
| EN 1248:2001+A1:2009 | Foundry machinery - Safety requirements for abrasive blasting equipment | C - | 01/01/2021 |
| EN 1265:1999+A1:2008 | Safety of machinery - Noise test code for foundry machines and equipment | C - | 01/01/2021 |
| EN 1374:2000+A1:2010 | Agricultural machinery - Silos stationary unloaders for round silos - Safety | C - | 01/01/2021 |
| EN 1398:2009 | Dock levellers - Safety requirements | C - | 01/01/2021 |
| EN 1417:2014 | Plastics and rubber machines - Two-roll mills - Safety requirements | C - | 01/01/2021 |
| EN 1459-1:2017 | Rough-terrain trucks - Safety requirements and verification - Part 1: Variable-reach trucks | C - | 01/01/2021 |
| EN 1459-2:2015 | Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks | C - | 01/01/2021 |
| EN 1459-2:2015+A1:2018 | Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks | C - | 01/01/2021 |
| EN 1459-5:2020 | Rough-terrain trucks - Safety requirements and verification - Part 5: Attachment interface | C - | 04/07/2022 |
| EN 1492-1:2000+A1:2008 | Textile slings - Safety - Part 1: Flat woven webbing slings made of man-made fibres for general purpose use | C - | 01/01/2021 |
| EN 1492-2:2000+A1:2008 | Textile slings - Safety - Part 2: Roundslings made of man-made fibres for general purpose use | C - | 01/01/2021 |
| EN 1492-4:2004+A1:2008 | Textile slings - Safety - Part 4: Lifting slings for general service made from natural and man-made fibre ropes | C - | 01/01/2021 |
| EN 1493:2010 | Vehicle lifts | C - | 01/01/2021 |
| EN 1494:2000+A1:2008 | Mobile or movable jacks and associated lifting equipment | C - | 01/01/2021 |
| EN 1495:1997+A2:2009, EN 1495:1997+A2:2009/AC:2010 |
Lifting platforms - Mast climbing work platforms | C - | 01/01/2021 |
| EN 1501-1:2011+A1:2015 | Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles | C - | 01/01/2021 |
| EN 1501-1:2021 | Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles | C - | 06/08/2022 |
| EN 1501-2:2005+A1:2009 | Refuse collection vehicles and associated lifting devices - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles | C - | 01/01/2021 |
| EN 1501-2:2021 | Refuse collection vehicles and associated lifting devices - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles | C - | 06/08/2022 |
| EN 1501-3:2008 | Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles | C - | 01/01/2021 |
| EN 1501-3:2021 | Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles | C - | 06/08/2022 |
| EN 1501-4:2007 | Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 4: Noise test code for refuse collection vehicles | C - | 01/01/2021 |
| EN 1501-5:2011 | Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles | C - | 01/01/2021 |
| EN 1501-5:2021 | Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles | C - | 06/08/2022 |
| EN 1526:1997+A1:2008 | Safety of industrial trucks - Additional requirements for automated functions on trucks | C - | 01/01/2021 |
| EN 1539:2015 | Dryers and ovens, in which flammable substances are released - Safety requirements | C - | 01/01/2021 |
| EN 1547:2001+A1:2009 | Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment | C - | 01/01/2021 |
| EN 1550:1997+A1:2008 | Machine-tools safety - Safety requirements for the design and construction of work holding chucks | C - | 01/01/2021 |
| EN 1554:2012 | Conveyor belts - Drum friction testing | C - | 01/01/2021 |
| EN 1570-1:2011+A1:2014 | Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landings | C - | 01/01/2021 |
| EN 1570-2:2016 | Safety requirements for lifting tables - Part 2: Lifting tables serving more than 2 fixed landings of a building, for lifting goods with a vertical travel speed not exceeding 0,15 m/s | C - | 01/01/2021 |
| EN 1612:2019 | Plastics and rubber machines - Reaction moulding machines and plants - Safety requirements | C - | 23/09/2021 |
| EN 1612-1:1997+A1:2008 | Plastics and rubber machines - Reaction moulding machines - Part 1: Safety requirements for metering and mixing units | C - | 01/01/2021 |
| EN 1672-2:2005+A1:2009 | Food processing machinery - Basic concepts - Part 2: Hygiene requirements | C - | 01/01/2021 |
| EN 1673:2000+A1:2009 | Food processing machinery - Rotary rack ovens - Safety and hygiene requirements | C - | 01/01/2021 |
| EN 1674:2015 | Food processing machinery - Dough sheeters - Safety and hygiene requirements | C - | 01/01/2021 |
| EN 1677-1:2000+A1:2008 | Components for slings - Safety - Part 1: Forged steel components, Grade 8 | C - | 01/01/2021 |
| EN 1677-2:2000+A1:2008 | Components for slings - Safety - Part 2: Forged steel lifting hooks with latch, Grade 8 | C - | 01/01/2021 |
| EN 1677-3:2001+A1:2008 | Components for slings - Safety - Part 3: Forged steel self-locking hooks - Grade 8 | C - | 01/01/2021 |
| EN 1677-4:2000+A1:2008 | Components for slings - Safety - Part 4: Links, Grade 8 | C - | 01/01/2021 |
| EN 1677-5:2001+A1:2008 | Components for slings - Safety - Part 5: Forged steel lifting hooks with latch - Grade 4 | C - | 01/01/2021 |
| EN 1677-6:2001+A1:2008 | Components for slings - Safety - Part 6: Links - Grade 4 | C - | 01/01/2021 |
| EN 1678:1998+A1:2010 | Food processing machinery - Vegetable cutting machines - Safety and hygiene requirements | C - | 01/01/2021 |
| EN 1679-1:1998+A1:2011 | Reciprocating internal combustion engines - Safety - Part 1: Compression ignition engines | C - | 01/01/2021 |
| EN 1755:2000+A2:2013 | Safety of industrial trucks - Operation in potentially explosive atmospheres - Use in flammable gas, vapour, mist and dust | C - | 01/01/2021 |
| EN 1756-1:2001+A1:2008 | Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 1: Tail lifts for goods | C - | 01/01/2021 |
| EN 1756-1:2021 | Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 1: Tail lifts for goods | C - | 06/08/2022 |
| EN 1756-2:2004+A1:2009 | Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 2: Tail lifts for passengers | C - | 01/01/2021 |
| EN 1777:2010 | Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing | C - | 01/01/2021 |
| EN 1804-1:2001+A1:2010 | Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements | C - | 01/01/2021 |
| EN 1804-1:2020 | Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements |
C - | 04/07/2022 |
| EN 1804-2:2001+A1:2010 | Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams | C - | 01/01/2021 |
| EN 1804-2:2020 | Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams | C - | 04/07/2022 |
| EN 1804-3:2006+A1:2010 | Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems | C - | 01/01/2021 |
| EN 1804-3:2020 | Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic and electro hydraulic control systems | C - | 04/07/2022 |
| EN 1807-1:2013 | Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws | C - | 01/01/2021 |
| EN 1807-2:2013 | Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines | C - | 01/01/2021 |
| EN 1808:2015 | Safety requirements for suspended access equipment - Design calculations, stability criteria, construction - Examinations and tests | C - | 01/01/2021 |
| EN 1829-1:2010 | High pressure water jet machines - Safety requirements - Part 1: Machines | C - | 01/01/2021 |
| EN 1829-1:2021 | High pressure water jet machines - Safety requirements - Part 1: Machines | C - | 06/08/2022 |
| EN 1829-2:2008, EN 1829-2:2008/AC:2011 |
High-pressure water jet machines - Safety requirements - Part 2: Hoses, hose lines and connectors | C - | 01/01/2021 |
| EN 1845:2007 | Footwear manufacturing machines - Footwear moulding machines - Safety requirements | C - | 01/01/2021 |
| EN 1846-2:2009+A1:2013 | Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance | C - | 01/01/2021 |
| EN 1846-3:2013 | Firefighting and rescue service vehicles - Part 3: Permanently installed equipment - Safety and performance | C - | 01/01/2021 |
| EN 1853:2017 | Agricultural machinery - Trailers - Safety | C - | 01/01/2021 |
| EN 1870-3:2001+A1:2009 | Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches | C - | 01/01/2021 |
| EN 1870-4:2012 | Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manual loading and/or unloading | C - | 01/01/2021 |
| EN 1870-5:2002+A2:2012 | Safety of woodworking machines - Circular sawing machines - Part 5: Circular sawbenches/up-cutting cross-cut sawing machines | C - | 01/01/2021 |
| EN 1870-6:2017 | Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machines for fire wood | C - | 01/01/2021 |
| EN 1870-7:2012 | Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading | C - | 01/01/2021 |
| EN 1870-8:2012 | Safety of woodworking machines - Circular sawing machines - Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading | C - | 01/01/2021 |
| EN 1870-9:2012 | Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading | C - | 01/01/2021 |
| EN 1870-10:2013 | Safety of woodworking machines - Circular sawing machines - Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines | C - | 01/01/2021 |
| EN 1870-11:2013 | Safety of woodworking machines - Circular sawing machines - Part 11: Semi automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws) | C - | 01/01/2021 |
| EN 1870-12:2013 | Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines | C - | 01/01/2021 |
| EN 1870-15:2012 | Safety of woodworking machines - Circular sawing machines - Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading | C - | 01/01/2021 |
| EN 1870-16:2012 | Safety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing machines for V cutting | C - | 01/01/2021 |
| EN 1870-17:2012+A1:2015 | Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws) | C - | 01/01/2021 |
| EN 1870-19:2013 | Safety of woodworking machines - Circular sawing machines - Part 19: Circular saw benches (with and without sliding table) and building site saws | C - | 01/01/2021 |
| EN 1889-1:2011 | Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles | C - | 01/01/2021 |
| EN 1889-2:2003+A1:2009 | Machines for underground mines - Mobile machines working underground - Safety - Part 2: Rail locomotives | C - | 01/01/2021 |
| EN 1915-1:2013 | Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements | C - | 01/01/2021 |
| EN 1915-2:2001+A1:2009 | Aircraft ground support equipment - General requirements - Part 2: Stability and strength requirements, calculations and test methods | C - | 01/01/2021 |
| EN 1915-3:2004+A1:2009 | Aircraft ground support equipment - General requirements - Part 3: Vibration measurement methods and reduction | C - | 01/01/2021 |
| EN 1915-4:2004+A1:2009 | Aircraft ground support equipment - General requirements - Part 4: Noise measurement methods and reduction | C - | 01/01/2021 |
| EN 1953:2013 | Atomising and spraying equipment for coating materials - Safety requirements | C - | 01/01/2021 |
| EN 1974:1998+A1:2009 | Food processing machinery - Slicing machines - Safety and hygiene requirements | C - | 01/01/2021 |
| EN 1974:2020 | Food processing machinery - Slicing machines - Safety and hygiene requirements | C - | 04/07/2022 |
| EN ISO 2151:2008 | Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (Grade 2) (ISO 2151:2004) | C - | 01/01/2021 |
| EN ISO 2860:2008 | Earth-moving machinery - Minimum access dimensions (ISO 2860:1992) | C - | 01/01/2021 |
| EN ISO 2867:2011 | Earth-moving machinery - Access systems (ISO 2867:2011) | C - | 01/01/2021 |
| EN ISO 3164:2013 | Earth-moving machinery - Laboratory evaluations of protective structures - Specifications for deflection-limiting volume (ISO 3164:2013) | C - | 01/01/2021 |
| EN ISO 3266:2010, EN ISO 3266:2010/A1:2015 |
Forged steel eyebolts grade 4 for general lifting purposes (ISO 3266:2010) | C - | 01/01/2021 |
| EN ISO 3411:2007 | Earth-moving machinery - Physical dimensions of operators and minimum operator space envelope (ISO 3411:2007) | C - | 01/01/2021 |
| EN ISO 3449:2008 | Earth-moving machinery - Falling-object protective structures - Laboratory tests and performance requirements (ISO 3449:2005) | C - | 01/01/2021 |
| EN ISO 3450:2011 | Earth-moving machinery - Wheeled or high-speed rubber-tracked machines - Performance requirements and test procedures for brake systems (ISO 3450:2011) | C - | 01/01/2021 |
| EN ISO 3457:2008 | Earth-moving machinery - Guards - Definitions and requirements (ISO 3457:2003) | C - | 01/01/2021 |
| EN ISO 3471:2008 | Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements (ISO 3471:2008) | C - | 01/01/2021 |
| EN ISO 3691-1:2015, EN ISO 3691-1:2015/AC:2016 |
Industrial trucks - Safety requirements and verification - Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks (ISO 3691-1:2011, including Cor 1:2013) | C - | 01/01/2021 |
| EN ISO 3691-1:2015, EN ISO 3691-1:2015/AC:2016, EN ISO 3691-1:2015/A1:2020 |
Industrial trucks - Safety requirements and verification - Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks (ISO 3691-1:2011, including Cor 1:2013) | C - | 23/09/2021 |
| EN ISO 3691-5:2014, EN ISO 3691-5:2014/AC:2014 |
Industrial trucks - Safety requirements and verification - Part 5: Pedestrian-propelled trucks (ISO 3691-5:2014) | C - | 01/01/2021 |
| EN ISO 3691-5:2015 | Industrial trucks - Safety requirements and verification - Part 5: Pedestrian-propelled trucks (ISO 3691-5:2014) | C - | 01/01/2021 |
| EN ISO 3691-5:2015, EN ISO 3691-5:2015/A1:2020 |
Industrial trucks - Safety requirements and verification - Part 5: Pedestrian-propelled trucks (ISO 3691-5:2014) | C - | 23/09/2021 |
| EN ISO 3691-6:2015, EN ISO 3691-6:2015/AC:2016 |
Industrial trucks - Safety requirements and verification - Part 6: Burden and personnel carriers (ISO 3691-6:2013) | C - | 01/01/2021 |
| EN ISO 4254-1:2015 | Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2013) | C - | 01/01/2021 |
| EN ISO 4254-5:2018 | Agricultural machinery - Safety - Part 5: Power-driven soil-working machines (ISO 4254-5:2018) | C - | 01/01/2021 |
| EN ISO 4254-6:2009, EN ISO 4254-6:2009/AC:2010 |
Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors (ISO 4254-6:2009) | C - | 01/01/2021 |
| EN ISO 4254-7:2017 | Agricultural machinery - Safety - Part 7: Combine harvesters, forage harvesters, cotton harvesters and sugar cane harversters (ISO 4254-7:2017) | C - | 01/01/2021 |
| EN ISO 4254-8:2018 | Agricultural machinery - Safety - Part 8: Solid fertilizer distributors (ISO 4254-8:2018) | C - | 01/01/2021 |
| EN ISO 4254-9:2018 | Agricultural machinery - Safety - Part 9: Seed drills (ISO 4254-9:2018) | C - | 01/01/2021 |
| EN ISO 4254-10:2009, EN ISO 4254-10:2009/AC:2010 |
Agricultural machinery - Safety - Part 10: Rotary tedders and rakes (ISO 4254-10:2009) | C - | 01/01/2021 |
| EN ISO 4254-11:2010 | Agricultural machinery - Safety - Part 11: Pick-up balers (ISO 4254-11:2010) | C - | 01/01/2021 |
| EN ISO 4254-11:2010, EN ISO 4254-11:2010/A1:2020 |
Agricultural machinery - Safety - Part 11: Pick-up balers (ISO 4254-11:2010) | C - | 23/09/2021 |
| EN ISO 4254-12:2012, EN ISO 4254-12:2012/A1:2017 |
Agricultural machinery - Safety - Part 12: Rotary disc and drum mowers and flail mowers (ISO 4254-12:2012) | C - | 01/01/2021 |
| EN ISO 4254-14:2016 | Agricultural machinery - Safety - Part 14: Bale wrappers (ISO 4254-14:2016) | C - | 01/01/2021 |
| EN ISO 5010:2019 | Earth-moving machinery - Wheeled machines - Steering requirements (ISO 5010:2019) |
C - | 23/09/2021 |
| EN ISO 5395-1:2013, EN ISO 5395-1:2013/A1:2018 |
Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 1: Terminology and common tests (ISO 5395-1:2013) | C - | 01/01/2021 |
| EN ISO 5395-2:2013, EN ISO 5395-2:2013/A1:2016, EN ISO 5395-2:2013/A2:2017 |
Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 2: Pedestrian-controlled lawnmowers (ISO 5395-2:2013) | C - | 01/01/2021 |
| EN ISO 5395-3:2013, EN ISO 5395-3:2013/A1:2017, EN ISO 5395-3:2013/A2:2018 |
Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 3: Ride-on lawnmowers with seated operator (ISO 5395-3:2013) | C - | 01/01/2021 |
| EN ISO 5674:2009 | Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria (ISO 5674:2004, corrected version 2005-07-01) | C - | 01/01/2021 |
| EN ISO 6682:2008 | Earth-moving machinery - Zones of comfort and reach for controls (ISO 6682:1986, including Amd 1:1989) | C - | 01/01/2021 |
| EN ISO 6683:2008 | Earth-moving machinery - Seat belts and seat belt anchorages - Performance requirements and tests (ISO 6683:2005) | C - | 01/01/2021 |
| EN ISO 7096:2008, EN ISO 7096:2008/AC:2009 |
Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2000) | C - | 01/01/2021 |
| EN ISO 7096:2020 | Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2020) | C - | 23/09/2021 |
| EN ISO 8230-1:2008 | Safety requirements for dry-cleaning machines - Part 1: Common safety requirements (ISO 8230-1:2008) | C - | 01/01/2021 |
| EN ISO 8230-2:2008 | Safety requirements for dry-cleaning machines - Part 2: Machines using perchloroethylene (ISO 8230-2:2008) | C - | 01/01/2021 |
| EN ISO 8230-3:2008 | Safety requirements for dry-cleaning machines - Part 3: Machines using combustible solvents (ISO 8230-3:2008) | C - | 01/01/2021 |
| EN ISO 8528-13:2016 | Reciprocating internal combustion engine driven alternating current generating sets - Part 13: Safety (ISO 8528-13:2016, Corrected version 2016-10-15) | C - | 01/01/2021 |
| EN ISO 9902-1:2001, EN ISO 9902-1:2001/A1:2009, EN ISO 9902-1:2001/A2:2014 |
Textile machinery - Noise test code - Part 1: Common requirements (ISO 9902-1:2001) | C - | 01/01/2021 |
| EN ISO 9902-2:2001, EN ISO 9902-2:2001/A1:2009, EN ISO 9902-2:2001/A2:2014 |
Textile machinery - Noise test code - Part 2: Spinning preparatory and spinning machinery (ISO 9902-2:2001) | C - | 01/01/2021 |
| EN ISO 9902-3:2001, EN ISO 9902-3:2001/A1:2009, EN ISO 9902-3:2001/A2:2014 |
Textile machinery - Noise test code - Part 3: Nonwoven machinery (ISO 9902-3:2001) | C - | 01/01/2021 |
| EN ISO 9902-4:2001, EN ISO 9902-4:2001/A1:2009, EN ISO 9902-4:2001/A2:2014 |
Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 9902-4:2001) | C - | 01/01/2021 |
| EN ISO 9902-5:2001, EN ISO 9902-5:2001/A1:2009, EN ISO 9902-5:2001/A2:2014 |
Textile machinery - Noise test code - Part 5: Weaving and knitting preparatory machinery (ISO 9902-5:2001) | C - | 01/01/2021 |
| EN ISO 9902-6:2001, EN ISO 9902-6:2001/A1:2009, EN ISO 9902-6:2001/A2:2014 |
Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery (ISO 9902-6:2001) | C - | 01/01/2021 |
| EN ISO 9902-7:2001, EN ISO 9902-7:2001/A1:2009, EN ISO 9902-7:2001/A2:2014 |
Textile machinery - Noise test code - Part 7: Dyeing and finishing machinery (ISO 9902-7:2001) | C - | 01/01/2021 |
| EN ISO 10218-1:2011 | Robots and robotic devices - Safety requirements for industrial robots - Part 1: Robots (ISO 10218-1:2011) | C - | 01/01/2021 |
| EN ISO 10218-2:2011 | Robots and robotic devices - Safety requirements for industrial robots - Part 2: Robot systems and integration (ISO 10218-2:2011) | C - | 01/01/2021 |
| EN ISO 10472-1:2008 | Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997) | C - | 01/01/2021 |
| EN ISO 10472-2:2008 | Safety requirements for industrial laundry machinery - Part 2: Washing machines and washer-extractors (ISO 10472-2:1997) | C - | 01/01/2021 |
| EN ISO 10472-3:2008 | Safety requirements for industrial laundry machinery - Part 3: Washing tunnel lines including component machines (ISO 10472-3:1997) | C - | 01/01/2021 |
| EN ISO 10472-4:2008 | Safety requirements for industrial laundry machinery - Part 4: Air dryers (ISO 10472-4:1997) | C - | 01/01/2021 |
| EN ISO 10472-5:2008 | Safety requirements for industrial laundry machinery - Part 5: Flatwork ironers, feeders and folders (ISO 10472-5:1997) | C - | 01/01/2021 |
| EN ISO 10472-6:2008 | Safety requirements for industrial laundry machinery - Part 6: Ironing and fusing presses (ISO 10472-6:1997) | C - | 01/01/2021 |
| EN ISO 10517:2009, EN ISO 10517:2009/A1:2013 |
Powered hand-held hedge trimmers - Safety (ISO 10517:2009) | C - | 01/01/2021 |
| EN ISO 10517:2019 | Powered hand-held hedge trimmers - Safety (ISO 10517:2019) | C - | 01/01/2021 |
| EN ISO 10821:2005, EN ISO 10821:2005/A1:2009 |
Industrial sewing machines - Safety requirements for sewing machines, units and systems (ISO 10821:2005) | C - | 01/01/2021 |
| EN ISO 11102-1:2009 | Reciprocating internal combustion engines - Handle starting equipment - Part 1: Safety requirements and tests (ISO 11102-1:1997) | C - | 01/01/2021 |
| EN ISO 11102-2:2009 | Reciprocating internal combustion engines - Handle starting equipment - Part 2: Method of testing the angle of disengagement (ISO 11102-2:1997) | C - | 01/01/2021 |
| EN ISO 11111-1:2016 | Textile machinery - Safety requirements - Part 1: Common requirements (ISO 11111-1:2016) | C - | 01/01/2021 |
| EN ISO 11111-2:2005, EN ISO 11111-2:2005/A1:2009, EN ISO 11111-2:2005/A2:2016 |
Textile machinery - Safety requirements - Part 2: Spinning preparatory and spinning machines (ISO 11111-2:2005) | C - | 01/01/2021 |
| EN ISO 11111-3:2005, EN ISO 11111-3:2005/A1:2009, EN ISO 11111-3:2005/A2:2016 |
Textile machinery - Safety requirements - Part 3: Nonwoven machinery (ISO 11111-3:2005) | C - | 01/01/2021 |
| EN ISO 11111-4:2005, EN ISO 11111-4:2005/A1:2009, EN ISO 11111-4:2005/A2:2016 |
Textile machinery - Safety requirements - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 11111-4:2005) | C - | 01/01/2021 |
| EN ISO 11111-5:2005, EN ISO 11111-5:2005/A1:2009, BS EN ISO 11111-5:2005/A2:2016 |
Textile machinery - Safety requirements - Part 5: Preparatory machinery to weaving and knitting (ISO 11111-5:2005) | C - | 01/01/2021 |
| EN ISO 11111-6:2005, EN ISO 11111-6:2005/A1:2009, EN ISO 11111-6:2005/A2:2016 |
Textile machinery - Safety requirements - Part 6: Fabric manufacturing machinery (ISO 11111-6:2005) | C - | 01/01/2021 |
| EN ISO 11111-7:2005, EN ISO 11111-7:2005/A1:2009, EN ISO 11111-7:2005/A2:2016 |
Textile machinery - Safety requirements - Part 7: Dyeing and finishing machinery (ISO 11111-7:2005) | C - | 01/01/2021 |
| EN ISO 11145:2016 | Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols (ISO 11145:2016) | C - | 01/01/2021 |
| EN ISO 11148-1:2011 | Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners (ISO 11148-1:2011) | C - | 01/01/2021 |
| EN ISO 11148-2:2011 | Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools (ISO/FDIS 11148-2:2011) | C - | 01/01/2021 |
| EN ISO 11148-3:2012 | Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers (ISO 11148-3:2012) | C - | 01/01/2021 |
| EN ISO 11148-4:2012 | Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools (ISO 11148-4:2012) | C - | 01/01/2021 |
| EN ISO 11148-5:2011 | Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills (ISO 11148-5:2011) | C - | 01/01/2021 |
| EN ISO 11148-6:2012 | Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2012) | C - | 01/01/2021 |
| EN ISO 11148-7:2012 | Hand-held non-electric power tools - Safety requirements - Part 7: Grinders (ISO 11148-7:2012) | C - | 01/01/2021 |
| EN ISO 11148-8:2011 | Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers (ISO 11148-8:2011) | C - | 01/01/2021 |
| EN ISO 11148-9:2011 | Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders (ISO 11148-9:2011) | C - | 01/01/2021 |
| EN ISO 11148-10:2011 | Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools (ISO 11148-10:2011) | C - | 01/01/2021 |
| EN ISO 11148-11:2011 | Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears (ISO 11148-11:2011) | C - | 01/01/2021 |
| EN ISO 11148-12:2012 | Hand-held non-electric power tools - Safety requirements - Part 12: Circular, oscillating and reciprocating saws (ISO 11148-12:2012) | C - | 01/01/2021 |
| EN ISO 11148-13:2018 | Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools (ISO 11148-13:2017) | C - | 01/01/2021 |
| EN ISO 11252:2013 | Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:2013) | C - | 01/01/2021 |
| EN ISO 11553-1:2008 | Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO 11553-1:2005) | C - | 01/01/2021 |
| EN ISO 11553-1:2020, EN ISO 11553-1:2020/A11:2020 |
Safety of machinery - Laser processing machines - Part 1: Laser safety requirements (ISO 11553-1:2020) |
B - | 04/07/2022 |
| EN ISO 11553-2:2008 | Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-held laser processing devices (ISO 11553-2:2007) | C - | 01/01/2021 |
| EN ISO 11553-3:2013 | Safety of machinery - Laser processing machines - Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2) (ISO 11553-3:2013) | C - | 01/01/2021 |
| EN ISO 11554:2017 | Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2017) | C - | 01/01/2021 |
| EN ISO 11680-1:2011 | Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Machines fitted with an integral combustion engine (ISO 11680-1:2011) | C - | 01/01/2021 |
| EN ISO 11680-2:2011 | Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Machines for use with back-pack power source (ISO 11680-2:2011) | C - | 01/01/2021 |
| EN ISO 11681-1:2011 | Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service (ISO 11681-1:2011) | C - | 01/01/2021 |
| EN ISO 11681-2:2011, EN ISO 11681-2:2011/A1:2017 |
Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:2011) | C - | 01/01/2021 |
| EN ISO 11806-1:2011 | Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 1: Machines fitted with an integral combustion engine (ISO 11806-1:2011) | C - | 01/01/2021 |
| EN ISO 11806-2:2011 | Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 2: Machines for use with back-pack power unit (ISO 11806-2:2011) | C - | 01/01/2021 |
| EN ISO 11850:2011, EN ISO 11850:2011/A1:2016 |
Machinery for forestry - General safety requirements (ISO 11850:2011) | C - | 01/01/2021 |
| EN 12001:2012 | Conveying, spraying and placing machines for concrete and mortar - Safety requirements | C - | 01/01/2021 |
| EN 12012-1:2018 | Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators and shredders | C - | 01/01/2021 |
| EN 12012-1:2007+A1:2008 | Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators | C - | 01/01/2021 |
| EN 12012-3:2001+A1:2008 | Plastics and rubber machines - Size reduction machines - Part 3: Safety requirements for shredders | C - | 01/01/2021 |
| EN 12012-4:2006+A1:2008 | Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators | C - | 01/01/2021 |
| EN 12013:2018 | Plastics and rubber machines - Internal mixers - Safety requirements | C - | 01/01/2021 |
| EN 12016:2013 | Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity | C - | 01/01/2021 |
| EN 12041:2014 | Food processing machinery - Moulders - Safety and hygiene requirements | C - | 01/01/2021 |
| EN 12042:2014 | Food processing machinery - Automatic dough dividers - Safety and hygiene requirements | C - | 01/01/2021 |
| EN 12043:2014 | Food processing machinery - Intermediate provers - Safety and hygiene requirements | C - | 01/01/2021 |
| EN 12044:2005+A1:2009 | Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements | C - | 01/01/2021 |
| EN 12053:2001+A1:2008 | Safety of industrial trucks - Test methods for measuring noise emissions | C - | 01/01/2021 |
| EN 12077-2:1998+A1:2008 | Cranes safety - Requirements for health and safety - Part 2: Limiting and indicating devices | C - | 01/01/2021 |
| EN 12110:2014 | Tunnelling machines - Air locks - Safety requirements | C - | 01/01/2021 |
| EN 12111:2014 | Tunnelling machines - Road headers and continuous miners - Safety requirements | C - | 01/01/2021 |
| EN 12158-1:2000+A1:2010 | Builders' hoists for goods - Part 1: Hoists with accessible platforms | C - | 01/01/2021 |
| EN 12158-2:2000+A1:2010 | Builders' hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices | C - | 01/01/2021 |
| EN 12159:2012 | Builders hoists for persons and materials with vertically guided cages | C - | 01/01/2021 |
| EN 12162:2001+A1:2009 | Liquid pumps - Safety requirements - Procedure for hydrostatic testing | C - | 01/01/2021 |
| EN 12203:2003+A1:2009 | Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements | C - | 01/01/2021 |
| EN 12267:2003+A1:2010 | Food processing machinery - Circular saw machines - Safety and hygiene requirements | C - | 01/01/2021 |
| EN 12268:2014 | Food processing machinery - Band saw machines - Safety and hygiene requirements | C - | 01/01/2021 |
| EN 12301:2019 | Plastics and rubber machines - Calenders - Safety requirements | C - | 23/09/2021 |
| EN 12301:2000+A1:2008 | Plastics and rubber machines - Calenders - Safety requirements | C - | 01/01/2021 |
| EN 12312-1:2013 | Aircraft ground support equipment - Specific requirements - Part 1: Passenger stairs | C - | 01/01/2021 |
| EN 12312-2:2014 | Aircraft ground support equipment - Specific requirements - Part 2: Catering vehicles | C - | 01/01/2021 |
| EN 12312-3:2017 | Aircraft ground support equipment - Specific requirements - Part 3: Conveyor belt vehicles | C - | 01/01/2021 |
| EN 12312-3:2017+A1:2020 | Aircraft ground support equipment - Specific requirements - Part 3: Conveyor belt vehicles | C - | 04/07/2022 |
| EN 12312-4:2014 | Aircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bridges | C - | 01/01/2021 |
| EN 12312-5:2005+A1:2009 | Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment | C - | 01/01/2021 |
| EN 12312-5:2021 | Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment | C - | 06/08/2021 |
| EN 12312-6:2017 | Aircraft ground support equipment - Specific requirements - Part 6: Deicers and de-icing/anti-icing equipment | C - | 01/01/2021 |
| EN 12312-7:2005+A1:2009 | Aircraft ground support equipment - Specific requirements - Part 7: Air-craft movement equipment | C - | 01/01/2021 |
| EN 12312-7:2020 | Aircraft ground support equipment - Specific requirements - Part 7: Air-craft movement equipment | C - | 04/07/2022 |
| EN 12312-8:2018 | Aircraft ground support equipment - Specific requirements - Part 8: Maintenance or service stairs and platforms | C - | 01/01/2021 |
| EN 12312-8:2005+A1:2009 | Aircraft ground support equipment - Specific requirements - Part 8: Maintenance stairs and platforms | C - | 01/01/2021 |
| EN 12312-9:2013 | Aircraft ground support equipment - Specific requirements - Part 9: Container/Pallet loaders | C - | 01/01/2021 |
| EN 12312-10:2005+A1:2009 | Aircraft ground support equipment - Specific requirements - Part 10: Container/Pallet transfer transporters | C - | 01/01/2021 |
| EN 12312-12:2017 | Aircraft ground support equipment - Specific requirements - Part 12: Potable water service equipment | C - | 01/01/2021 |
| EN 12312-13:2017 | Aircraft ground support equipment - Specific requirements - Part 13: Lavatory service equipment | C - | 01/01/2021 |
| EN 12312-14:2014 | Aircraft ground support equipment - Specific requirements - Part 14: Disabled/incapacitated passenger boarding vehicles | C - | 01/01/2021 |
| EN 12312-15:2006+A1:2009 | Aircraft ground support equipment - Specific requirements - Part 15: Baggage and equipment tractors | C - | 01/01/2021 |
| EN 12312-16:2005+A1:2009 | Aircraft ground support equipment - Specific requirements - Part 16: Air start equipment | C - | 01/01/2021 |
| EN 12312-17:2004+A1:2009 | Aircraft ground support equipment - Specific requirements - Part 17: Air conditioning equipment | C - | 01/01/2021 |
| EN 12312-18:2005+A1:2009 | Aircraft ground support equipment - Specific requirements - Part 18: Nitrogen or Oxygen units | C - | 01/01/2021 |
| EN 12312-19:2005+A1:2009 | Aircraft ground support equipment - Specific requirements - Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions | C - | 01/01/2021 |
| EN 12312-20:2005+A1:2009 | Aircraft ground support equipment - Specific requirements - Part 20: Electrical ground power units | C - | 01/01/2021 |
| EN 12321:2003+A1:2009 | Underground mining machinery - Specification for the safety requirements of armoured face conveyors | C - | 01/01/2021 |
| EN 12331:2003+A2:2010 | Food processing machinery - Mincing machines - Safety and hygiene requirements | C - | 01/01/2021 |
| EN 12348:2000+A1:2009 | Core drilling machines on stand - Safety | C - | 01/01/2021 |
| EN 12355:2003+A1:2010 | Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements | C - | 01/01/2021 |
| EN 12385-1:2002+A1:2008 | Steel wire ropes - Safety - Part 1: General requirements | C - | 01/01/2021 |
| EN 12385-2:2002+A1:2008 | Steel wire ropes - Safety - Part 2: Definitions, designation and classification | C - | 01/01/2021 |
| EN 12385-3:2004+A1:2008 | Steel wire ropes - Safety - Part 3: Information for use and maintenance | C - | 01/01/2021 |
| EN 12385-4:2002+A1:2008 | Steel wire ropes - Safety - Part 4: Stranded ropes for general lifting applications | C - | 01/01/2021 |
| EN 12385-5:2021 | Steel wire ropes - Safety - Part 5:Stranded ropes for lifts | C - | 06/08/2022 |
| EN 12385-10:2003+A1:2008 | Steel wire ropes - Safety - Part 10: Spiral ropes for general structural applications | C - | 01/01/2021 |
| EN 12387:2005+A1:2009 | Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements | C - | 01/01/2021 |
| EN 12409:2008+A1:2011 | Plastics and rubber machines - Thermoforming machines - Safety requirements | C - | 01/01/2021 |
| EN 12417:2001+A2:2009, EN 12417:2001+A2:2009/AC:2010 |
Machine tools - Safety - Machining centres | C - | 01/01/2021 |
| EN 12418:2000+A1:2009 | Masonry and stone cutting-off machines for job site - Safety | C - | 01/01/2021 |
| EN 12463:2004+A1:2011 | Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements | C - | 01/01/2021 |
| EN 12505:2000+A1:2009 | Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene requirements | C - | 01/01/2021 |
| EN 12525:2000+A2:2010 | Agricultural machinery - Front loaders - Safety | C - | 01/01/2021 |
| EN 12545:2000+A1:2009 | Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements | C - | 01/01/2021 |
| EN 12547:2014 | Centrifuges - Common safety requirements | C - | 01/01/2021 |
| EN 12549:1999+A1:2008 | Acoustics - Noise test code for fastener driving tools - Engineering method | C - | 01/01/2021 |
| EN 12581:2005+A1:2010 | Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements | C - | 01/01/2021 |
| EN 12609:2021 | Truck mixers - Safety requirements | C - | 06/08/2022 |
| EN 12621:2006+A1:2010 | Machinery for the supply and circulation of coating materials under pressure - Safety requirements | C - | 01/01/2021 |
| EN 12622:2009+A1:2013 | Safety of machine tools - Hydraulic press brakes | C - | 01/01/2021 |
| EN 12629-1:2000+A1:2010 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1: Common requirements | C - | 01/01/2021 |
| EN 12629-2:2002+A1:2010 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 2: Block making machines | C - | 01/01/2021 |
| EN 12629-3:2002+A1:2010 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 3: Slide and turntable machines | C - | 01/01/2021 |
| EN 12629-4:2001+A1:2010 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 4:Concrete roof tile making machines | C - | 01/01/2021 |
| EN 12629-5-1:2003+A1:2010 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-1: Pipe making machines manufacturing in the vertical axis | C - | 01/01/2021 |
| EN 12629-5-2:2003+A1:2010 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-2: Pipe making machines manufacturing in the horizontal axis | C - | 01/01/2021 |
| EN 12629-5-3:2003+A1:2010 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-3: Pipe prestressing machines | C - | 01/01/2021 |
| EN 12629-5-4:2003+A1:2010 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-4: Concrete pipe coating machines | C - | 01/01/2021 |
| EN 12629-6:2004+A1:2010 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products | C - | 01/01/2021 |
| EN 12629-7:2004+A1:2010 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for long line manufacture of prestressed products | C - | 01/01/2021 |
| EN 12629-8:2002+A1:2010 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 8: Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete) | C - | 01/01/2021 |
| EN 12635:2002+A1:2008 | Industrial, commercial and garage doors and gates - Installation and use | C - | 01/01/2021 |
| EN 12643:2014 | Earth-moving machinery - Rubber-tyred machines - Steering requirements (ISO 5010:1992 modified) | C - | 01/01/2021 |
| EN 12644-1:2001+A1:2008 | Cranes - Information for use and testing - Part 1: Instructions | C - | 01/01/2021 |
| EN 12644-2:2000+A1:2008 | Cranes - Information for use and testing - Part 2: Marking | C - | 01/01/2021 |
| EN 12649:2008+A1:2011 | Concrete compactors and smoothing machines - Safety | C - | 01/01/2021 |
| EN 12653:1999+A2:2009 | Footwear, leather and imitation leather manufacturing machines - Nailing machines - Safety requirements | C - | 01/01/2021 |
| EN 12693:2008 | Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors | C - | 01/01/2021 |
| EN 12717:2001+A1:2009 | Safety of machine tools - Drilling machines | C - | 01/01/2021 |
| EN 12733:2018 | Agricultural and forestry machinery - Pedestrian controlled motor mowers - Safety | C - | 01/01/2021 |
| EN 12733:2001+A1:2009 | Agricultural and forestry machinery - Pedestrian controlled motor mowers - Safety | C - | 01/01/2021 |
| EN 12750:2013 | Safety of woodworking machines - Four sided moulding machines | C - | 01/01/2021 |
| EN 12753:2005+A1:2010 | Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements | C - | 01/01/2021 |
| EN 12757-1:2005+A1:2010 | Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing | C - | 01/01/2021 |
| EN 12779:2015 | Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements | C - | 01/01/2021 |
| EN 12852:2001+A1:2010 | Food processing machinery - Food processors and blenders - Safety and hygiene requirements | C - | 01/01/2021 |
| EN 12853:2001+A1:2010, EN 12853:2001+A1:2010/AC:2010 |
Food processing machinery - Hand-held blenders and whisks - Safety and hygiene requirements | C - | 01/01/2021 |
| EN 12854:2003+A1:2010 | Food processing machinery - Beam mixers - Safety and hygiene requirements | C - | 01/01/2021 |
| EN 12855:2003+A1:2010 | Food processing machinery - Rotating bowl cutters - Safety and hygiene requirements | C - | 01/01/2021 |
| EN 12881-1:2014 | Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests | C - | 01/01/2021 |
| EN 12881-2:2005+A1:2008 | Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test | C - | 01/01/2021 |
| EN 12882:2015 | Conveyor belts for general purpose use - Electrical and flammability safety requirements | C - | 01/01/2021 |
| EN 12921-1:2005+A1:2010 | Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements | C - | 01/01/2021 |
| EN 12921-2:2005+A1:2008 | Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 2: Safety of machines using water based cleaning liquids | C - | 01/01/2021 |
| EN 12921-3:2005+A1:2008 | Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids | C - | 01/01/2021 |
| EN 12921-4:2005+A1:2008 | Machines for surface cleaning and pretreatment of industrial items using liquids and vapours - Part 4: Safety of machines using halogenated solvents | C - | 01/01/2021 |
| EN 12965:2003+A2:2009 | Tractors and machinery for agriculture and forestry - Power take-off (PTO) drive shafts and their guards - Safety | C - | 01/01/2021 |
| EN 12965:2019 | Tractors and machinery for agriculture and forestry - Power take-off (PTO) drive shafts and their guards - Safety | C - | 23/09/2021 |
| EN 12978:2003+A1:2009 | Industrial, commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test methods | C - | 01/01/2021 |
| EN 12981:2005+A1:2009 | Coating plants - Spray booths for application of organic powder coating material - Safety requirements | C - | 01/01/2021 |
| EN 12984:2005+A1:2010 | Food processing machinery - Portable and/or hand-guided machines and appliances with mechanically driven cutting tools - Safety and hygiene requirements | C - | 01/01/2021 |
| EN 12999:2011+A2:2018 | Cranes - Loader cranes | C - | 01/01/2021 |
| EN 12999:2020 | Cranes - Loader cranes | C - | 04/07/2022 |
| EN 13000:2010+A1:2014 | Cranes - Mobile cranes | C - | 01/01/2021 |
| EN 13001-1:2015 | Cranes - General design - Part 1: General principles and requirements | C - | 01/01/2021 |
| EN 13001-2:2014 | Crane safety - General design - Part 2: Load actions | C - | 01/01/2021 |
| EN 13001-2:2021 | Crane safety - General design - Part 2: Load actions | C - | 06/08/2022 |
| EN 13001-3-1:2012+A2:2018 | Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure | C - | 01/01/2021 |
| EN 13001-3-2:2014 | Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems | C - | 01/01/2021 |
| EN 13001-3-3:2014 | Cranes - General design - Part 3-3: Limit states and proof of competence of wheel/rail contacts | C - | 01/01/2021 |
| EN 13001-3-5:2016 | Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks | C - | 01/01/2021 |
| EN 13001-3-6:2018 | Cranes - General design - Part 3-6: Limit states and proof of competence of machinery - Hydraulic cylinders | C - | 01/01/2021 |
| EN 13001-3-6:2018+A1:2021 | Cranes - General design - Part 3-6: Limit states and proof of competence of machinery - Hydraulic cylinders | C - | 06/08/2022 |
| EN 13015:2001+A1:2008 | Maintenance for lifts and escalators - Rules for maintenance instructions | C - | 01/01/2021 |
| EN 13019:2001+A1:2008 | Machines for road surface cleaning - Safety requirements | C - | 01/01/2021 |
| EN 13020:2015 | Road surface treatment machines - Safety requirements | C - | 01/01/2021 |
| EN 13021:2003+A1:2008 | Winter service machines - Safety requirements | C - | 01/01/2021 |
| EN 13023:2003+A1:2010 | Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy grades 2 and 3 | C - | 01/01/2021 |
| EN 13035-1:2008 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 1: Storage, handling and transportation equipment inside the factory | C - | 01/01/2021 |
| EN 13035-2:2008 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 2: Storage, handling and transportation equipment outside the factory | C - | 01/01/2021 |
| EN 13035-3:2003+A1:2009, EN 13035-3:2003+A1:2009/AC:2010 |
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines | C - | 01/01/2021 |
| EN 13035-4:2003+A1:2009 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4: Tilting tables | C - | 01/01/2021 |
| EN 13035-5:2006+A1:2009 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 5: Machines and installations for stacking and de-stacking | C - | 01/01/2021 |
| EN 13035-6:2006+A1:2009 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6: Machines for break-out | C - | 01/01/2021 |
| EN 13035-7:2006+A1:2009 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glass | C - | 01/01/2021 |
| EN 13035-9:2006+A1:2010 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations | C - | 01/01/2021 |
| EN 13035-11:2006+A1:2010 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines | C - | 01/01/2021 |
| EN 13042-1:2007+A1:2009 | Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 1: Gob feeder | C - | 01/01/2021 |
| EN 13042-2:2004+A1:2009 | Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 2: Handling machines for feeding | C - | 01/01/2021 |
| EN 13042-3:2007+A1:2009 | Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 3: IS machines | C - | 01/01/2021 |
| EN 13042-5:2003+A1:2009 | Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 5: Presses | C - | 01/01/2021 |
| EN 13059:2002+A1:2008 | Safety of industrial trucks - Test methods for measuring vibration | C - | 01/01/2021 |
| EN 13102:2005+A1:2008 | Ceramic machines - Safety - Loading and unloading of fine clay tiles | C - | 01/01/2021 |
| EN 13112:2002+A1:2009 | Tannery machines - Splitting and bandknife shearing machines - Safety requirements | C - | 01/01/2021 |
| EN 13113:2002+A1:2010 | Tannery machines - Roller coating machines - Safety requirements | C - | 01/01/2021 |
| EN 13114:2002+A1:2009 | Tannery machines - Rotating process vessels - Safety requirements | C - | 01/01/2021 |
| EN 13118:2000+A1:2009 | Agricultural machinery - Potato harvesting equipment - Safety | C - | 01/01/2021 |
| EN 13120:2009+A1:2014, EN 13120:2009+A1:2014/AC:2015 |
Internal blinds - Performance requirements including safety | C - | 01/01/2021 |
| EN 13128:2001+A2:2009, EN 13128:2001+A2:2009/AC:2010 |
Safety of machine tools - Milling machines (including boring machines) | C - | 01/01/2021 |
| EN 13135:2013+A1:2018 | Cranes - Safety - Design - Requirements for equipment | C - | 01/01/2021 |
| EN 13140:2000+A1:2009 | Agricultural machinery - Sugar beet and fodder beet harvesting equipment - Safety | C - | 01/01/2021 |
| EN 13155:2003+A2:2009 | Cranes - Safety - Non-fixed load lifting attachments | C - | 01/01/2021 |
| EN 13157:2004+A1:2009 | Cranes - Safety - Hand powered cranes | C - | 01/01/2021 |
| EN 13204:2016 | Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements | C - | 01/01/2021 |
| EN 13208:2003+A1:2010 | Food processing machinery - Vegetable peelers - Safety and hygiene requirements | C - | 01/01/2021 |
| EN 13241:2003+A2:2016 | Industrial, commercial, garage doors and gates - Product standard, performance characteristics | C - | 01/01/2021 |
| EN 13288:2005+A1:2009 | Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements | C - | 01/01/2021 |
| EN 13289:2001+A1:2013 | Pasta processing plants - Dryers and coolers - Safety and hygiene requirements | C - | 01/01/2021 |
| EN 13355:2004+A1:2009 | Coating plants - Combined booths - Safety requirements | C - | 01/01/2021 |
| EN 13367:2005+A1:2008, EN 13367:2005+A1:2008/AC:2009 |
Ceramic machines - Safety - Transfer platforms and cars | C - | 01/01/2021 |
| EN 13378:2001+A1:2013 | Pasta processing plants - Pasta presses - Safety and hygiene requirements | C - | 01/01/2021 |
| EN 13379:2001+A1:2013 | Pasta processing plants - Spreader, stripping and cutting machine, stick return conveyor, stick magazine - Safety and hygiene requirements | C - | 01/01/2021 |
| EN 13389:2005+A1:2009 | Food processing machinery - Mixers with horizontal shafts - Safety and hygiene requirements | C - | 01/01/2021 |
| EN 13390:2002+A1:2009 | Food processing machinery - Pie and tart machines - Safety and hygiene requirements | C - | 01/01/2021 |
| EN 13411-1:2002+A1:2008 | Terminations for steel wire ropes - Safety - Part 1: Thimbles for steel wire rope slings | C - | 01/01/2021 |
| EN 13411-2:2001+A1:2008 | Terminations for steel wire ropes - Safety - Part 2: Splicing of eyes for wire rope slings | C - | 01/01/2021 |
| EN 13411-3:2004+A1:2008 | Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule-securing | C - | 01/01/2021 |
| EN 13411-4:2011 | Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing | C - | 01/01/2021 |
| EN 13411-5:2003+A1:2008 | Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips | C - | 01/01/2021 |
| EN 13411-6:2004+A1:2008 | Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket | C - | 01/01/2021 |
| EN 13411-7:2006+A1:2008 | Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket | C - | 01/01/2021 |
| EN 13411-8:2011 | Terminations for steel wire ropes - Safety - Part 8: Swage terminals and swaging | C - | 01/01/2021 |
| EN 13414-1:2003+A2:2008 | Steel wire rope slings - Safety - Part 1: Slings for general lifting service | C - | 01/01/2021 |
| EN 13414-2:2003+A2:2008 | Steel wire rope slings - Safety - Part 2: Specification for information for use and maintenance to be provided by the manufacturer | C - | 01/01/2021 |
| EN 13414-3:2003+A1:2008 | Steel wire rope slings - Safety - Part 3: Grommets and cable-laid slings | C - | 01/01/2021 |
| EN 13418:2013 | Plastics and rubber machines - Winding machines for film or sheet - Safety requirements | C - | 01/01/2021 |
| EN 13448:2001+A1:2009 | Agricultural and forestry machinery - Inter-row mowing units - Safety | C - | 01/01/2021 |
| EN 13457:2004+A1:2010 | Footwear, leather and imitation leather goods manufacturing machines - Splitting, skiving, cutting, cementing and cement drying machines - Safety requirements | C - | 01/01/2021 |
| EN ISO 13482:2014 | Robots and robotic devices - Safety requirements for personal care robots (ISO 13482:2014) | C - | 01/01/2021 |
| EN 13524:2003+A2:2014 | Highway maintenance machines - Safety requirements | C - | 01/01/2021 |
| EN 13531:2001+A1:2008 | Earth-moving machinery - Tip-over protection structure (TOPS) for compact excavators - Laboratory tests and performance requirements (ISO 12117:1997 modified) | C - | 01/01/2021 |
| EN 13534:2006+A1:2010 | Food processing machinery - Curing injection machines - Safety and hygiene requirements | C - | 01/01/2021 |
| EN 13557:2003+A2:2008 | Cranes - Controls and control stations | C - | 01/01/2021 |
| EN 13561:2015, EN 13561:2015/AC:2016 |
External blinds and awnings - Performance requirements including safety | C - | 01/01/2021 |
| EN 13570:2005+A1:2010 | Food processing machinery - Mixing machines - Safety and hygiene requirements | C - | 01/01/2021 |
| EN 13586:2004+A1:2008 | Cranes - Access | C - | 01/01/2021 |
| EN 13586:2020 | Cranes - Access | C - | 04/07/2022 |
| EN 13591:2005+A1:2009 | Food processing machinery - Fixed deck oven loaders - Safety and hygiene requirements | C - | 01/01/2021 |
| EN 13617-1:2012 | Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units | C - | 01/01/2021 |
| EN 13621:2004+A1:2010 | Food processing machinery - Salad dryers - Safety and hygiene requirements | C - | 01/01/2021 |
| EN 13659:2015 | Shutters and external venetian blinds - Performance requirements including safety | C - | 01/01/2021 |
| EN 13675:2004+A1:2010 | Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment | C - | 01/01/2021 |
| EN 13683:2003+A2:2011, EN 13683:2003+A2:2011/AC:2013 |
Garden equipment - Integrally powered shredders/chippers - Safety | C - | 01/01/2021 |
| EN 13684:2018 | Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety | C - | 01/01/2021 |
| EN 13731:2007 | Lifting bag systems for fire and rescue service use - Safety and performance requirements | C - | 01/01/2021 |
| EN 13732:2013 | Food processing machinery - Bulk milk coolers on farms - Requirements for performance, safety and hygiene | C - | 01/01/2021 |
| EN 13736:2003+A1:2009 | Safety of machine tools - Pneumatic presses | C - | 01/01/2021 |
| EN ISO 13766-2:2018 | Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of machines with internal electrical power supply - Part 2: Additional EMC requirements for functional safety (ISO 13766-2:2018) | C - | 01/01/2021 |
| EN 13852-1:2013 | Cranes - Offshore cranes - Part 1: General-purpose offshore cranes | C - | 01/01/2021 |
| EN 13852-3:2021 | Cranes - Offshore cranes - Part 3: Light offshore cranes |
C - | 06/08/2022 |
| EN 13862:2001+A1:2009 | Floor cutting-off machines - Safety | C - | 01/01/2021 |
| EN 13870:2015 | Food processing machinery - Portion cutting machines - Safety and hygiene requirements | C - | 01/01/2021 |
| EN 13871:2014 | Food processing machinery - Cubes cutting machinery - Safety and hygiene requirements | C - | 01/01/2021 |
| EN 13885:2005+A1:2010 | Food processing machinery - Clipping machines - Safety and hygiene requirements | C - | 01/01/2021 |
| EN 13886:2005+A1:2010 | Food processing machinery - Cooking kettles equipped with powered stirrer and/or mixer - Safety and hygiene requirements | C - | 01/01/2021 |
| EN 13889:2003+A1:2008 | Forged steel shackles for general lifting purposes - Dee shackles and bow shackles - Grade 6 - Safety | C - | 01/01/2021 |
| EN 13951:2012 | Liquid pumps - Safety requirements - Agrifoodstuffs equipment; Design rules to ensure hygiene in use | C - | 01/01/2021 |
| EN 13954:2005+A1:2010 | Food processing machinery - Bread slicers - Safety and hygiene requirements | C - | 01/01/2021 |
| EN 13977:2011 | Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance | C - | 01/01/2021 |
| EN 13985:2003+A1:2009 | Machine tools - Safety - Guillotine shears | C - | 01/01/2021 |
| EN 14010:2003+A1:2009 | Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages | C - | 01/01/2021 |
| EN 14018:2005+A1:2009 | Agricultural and forestry machinery - Seed drills - Safety | C - | 01/01/2021 |
| EN 14033-3:2017 | Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements | C - | 01/01/2021 |
| EN 14033-4:2019 | Railway applications - Track - Railbound construction and maintenance machines - Part 4: Technical requirements for running, travelling and working on urban rail | C - | 01/01/2021 |
| EN 14043:2014 | High rise aerial appliances for fire and rescue service use - Turntable ladders with combined movements - Safety and performance requirements and test methods | C - | 01/01/2021 |
| EN 14044:2014 | High rise aerial appliances for fire and rescue service use - Turntable ladders with sequential movements - Safety and performance requirements and test methods | C - | 01/01/2021 |
| EN 14070:2003+A1:2009, EN 14070:2003+A1:2009/AC:2010 |
Safety of machine tools - Transfer and special-purpose machines | C - | 01/01/2021 |
| EN 14238:2004+A1:2009 | Cranes - Manually controlled load manipulating devices | C - | 01/01/2021 |
| EN ISO 14314:2009 | Reciprocal internal combustion engines - Recoil starting equipment - General safety requirements (ISO 14314:2004) | C - | 01/01/2021 |
| EN 14439:2006+A2:2009 | Cranes - Safety - Tower cranes | C - | 01/01/2021 |
| EN 14462:2005+A1:2009 | Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3 | C - | 01/01/2021 |
| EN 14466:2005+A1:2008 | Fire-fighting pumps - Portable pumps - Safety and performance requirements, tests | C - | 01/01/2021 |
| EN 14492-1:2006+A1:2009, EN 14492-1:2006+A1:2009/AC:2010 |
Cranes - Power driven winches and hoists - Part 1: Power driven winches | C - | 01/01/2021 |
| EN 14492-2:2006+A1:2009, EN 14492-2:2006+A1:2009/AC:2010 |
Cranes - Power driven winches and hoists - Part 2: Power driven hoists | C - | 01/01/2021 |
| EN 14502-2:2005+A1:2008 | Cranes - Equipment for the lifting of persons - Part 2: Elevating control stations | C - | 01/01/2021 |
| EN 14655:2005+A1:2010 | Food processing machinery - Baguette slicers - Safety and hygiene requirements | C - | 01/01/2021 |
| EN 14656:2006+A1:2010 | Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals | C - | 01/01/2021 |
| EN 14658:2005+A1:2010 | Continuous handling equipment and systems - General safety requirements for continuous handling equipment for opencast lignite mining | C - | 01/01/2021 |
| EN 14673:2006+A1:2010 | Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals | C - | 01/01/2021 |
| EN 14677:2008 | Safety of machinery - Secondary steelmaking - Machinery and equipment for treatment of liquid steel | C - | 01/01/2021 |
| EN 14681:2006+A1:2010 | Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces | C - | 01/01/2021 |
| EN 14710-1:2005+A2:2008 | Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 1: Classification, general and safety requirements | C - | 01/01/2021 |
| EN 14710-2:2005+A2:2008 | Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 2: Verification of general and safety requirements | C - | 01/01/2021 |
| EN 14753:2007 | Safety of machinery - Safety requirements for machinery and equipment for continuous casting of steel | C - | 01/01/2021 |
| EN 14886:2008 | Plastics and rubber machines - Bandknife cutting machines for block foams - Safety requirements | C - | 01/01/2021 |
| EN 14910:2007+A1:2009 | Garden equipment - Walk-behind combustion engine powered trimmers - Safety | C - | 01/01/2021 |
| EN 14930:2007+A1:2009 | Agricultural and forestry machinery and gardening equipment - Pedestrian controlled and hand-held machines - Determination of accessibility of hot surfaces | C - | 01/01/2021 |
| EN 14957:2006+A1:2010 | Food processing machinery - Dishwashing machines with conveyor - Safety and hygiene requirements | C - | 01/01/2021 |
| EN 14958:2006+A1:2009 | Food processing machinery - Machinery for grinding and processing flour and semolina - Safety and hygiene requirements | C - | 01/01/2021 |
| EN 14973:2015 | Conveyor belts for use in underground installations - Electrical and flammability safety requirements | C - | 01/01/2021 |
| EN ISO 14982:2009 | Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998) | C - | 01/01/2021 |
| EN 14985:2012 | Cranes - Slewing jib cranes | C - | 01/01/2021 |
| EN 15000:2008 | Safety of industrial trucks - Self propelled variable reach trucks - Specification, performance and test requirements for longitudinal load moment indicators and longitudinal load moment limiters | C - | 01/01/2021 |
| EN 15011:2011+A1:2014 | Cranes - Bridge and gantry cranes | C - | 01/01/2021 |
| Cranes - Bridge and gantry cranes | C - | 04/07/2022 | |
| EN ISO 15012-4:2016 | Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 4: General requirements (ISO 15012-4:2016) | C - | 01/01/2021 |
| EN 15027:2007+A1:2009 | Transportable wall saw and wire saw equipment for job site - Safety | C - | 01/01/2021 |
| EN 15056:2006+A1:2009 | Cranes - Requirements for container handling spreaders | C - | 01/01/2021 |
| EN 15059:2009+A1:2015 | Snow grooming equipment - Safety requirements | C - | 01/01/2021 |
| EN 15061:2007+A1:2008 | Safety of machinery - Safety requirements for strip processing line machinery and equipment | C - | 01/01/2021 |
| EN 15067:2007 | Plastics and rubber machines - Film converting machines for bags and sacks - Safety requirements | C - | 01/01/2021 |
| EN 15093:2008 | Safety of Machinery - Safety requirements for hot flat rolling mills | C - | 01/01/2021 |
| EN 15094:2008 | Safety of Machinery - Safety requirements for cold flat rolling mills | C - | 01/01/2021 |
| EN 15095:2007+A1:2008 | Power-operated mobile racking and shelving, carousels and storage lifts - Safety requirements | C - | 01/01/2021 |
| EN 15162:2008 | Machines and plants for mining and tooling of natural stone - Safety requirements for gang saws | C - | 01/01/2021 |
| EN 15163:2008 | Machines and installations for the exploitation and processing of natural stone - Safety - Requirements for diamond wire saws | C - | 01/01/2021 |
| EN 15164:2008 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for chain- and belt-slotting machines | C - | 01/01/2021 |
| EN 15166:2008 | Food processing machinery - Automatic back splitting machines of butchery carcasses - Safety and hygiene requirements | C - | 01/01/2021 |
| EN 15194:2017 | Cycles - Electrically power assisted cycles - EPAC Bicycles | C - | 01/01/2021 |
| EN 15268:2008 | Petrol filling stations - Safety requirements for the construction of submersible pump assemblies | C - | 01/01/2021 |
| EN 15503:2009+A2:2015 | Garden equipment - Garden blowers, vacuums and blower/vacuums - Safety | C - | 01/01/2021 |
| EN 15571:2020 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface-finishing machines |
C - | 04/07/2022 |
| EN 15572:2015 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for edge finishing machines | C - | 01/01/2021 |
| EN 15695-1:2017 | Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 1: Cab classification, requirements and test procedures | C - | 01/01/2021 |
| EN 15695-2:2017 | Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 2: Filters, requirements and test procedures | C - | 01/01/2021 |
| EN 15700:2011 | Safety for conveyor belts for winter sport or leisure use | C - | 01/01/2021 |
| EN ISO 15744:2008 | Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2) (ISO 15744:2002) | C - | 01/01/2021 |
| EN 15746-2:2010+A1:2011 | Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements | C - | 01/01/2021 |
| EN 15774:2010 | Food processing machinery - Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi) - Safety and hygiene requirements | C - | 01/01/2021 |
| EN 15811:2014 | Agricultural machinery - Fixed guards and interlocked guards with or without guard locking for moving transmission parts (ISO/TS 28923:2012 modified) | C - | 01/01/2021 |
| EN 15830:2012 | Rough-terrain variable reach trucks - Visibility - Test methods and verification | C - | 01/01/2021 |
| EN 15861:2012 | Food processing machinery - Smokehouses - Safety and hygiene requirements | C - | 01/01/2021 |
| EN 15895:2011+A1:2018 | Cartridge operated hand-held tools - Safety requirements - Fixing and hard marking tools | C - | 01/01/2021 |
| EN 15949:2012 | Safety of machinery - Safety requirements for bar mills, structural steel mills and wire rod mills | C - | 01/01/2021 |
| EN 15954-2:2013 | Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements | C - | 01/01/2021 |
| EN 15955-2:2013 | Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements | C - | 01/01/2021 |
| EN 15997:2011, EN 15997:2011/AC:2012 |
All terrain vehicles (ATVs - Quads) - Safety requirements and test methods | C - | 01/01/2021 |
| EN 16005:2012, EN 16005:2012/AC:2015 |
Power operated pedestrian doorsets - Safety in use - Requirements and test methods | C - | 01/01/2021 |
| EN 16029:2012 | Ride-on, motorized vehicles intended for the transportation of persons and not intended for use on public roads - Single-track two-wheel motor vehicles - Safety requirements and test methods | C - | 01/01/2021 |
| EN ISO 16089:2015 | Machine tools - Safety - Stationary grinding machines (ISO 16089:2015) | C - | 01/01/2021 |
| EN ISO 16092-1:2018 | Machine tools safety - Presses - Part 1: General safety requirements (ISO 16092-1:2017) | C - | 01/01/2021 |
| EN ISO 16092-2:2020 | Machine tools safety - Presses - Part 2: Safety requirement for mechanical presses (ISO 16092-2:2019) | C - | 04/07/2022 |
| EN ISO 16092-3:2018 | Machine tools safety - Presses - Part 3: Safety requirements for hydraulic presses (ISO 16092-3:2017) | C - | 01/01/2021 |
| EN ISO 16092-4:2020 | Machine tools safety - Presses - Part 4: Safety requirements for pneumatic presses (ISO 16092-4:2019) | C - | 04/07/2022 |
| EN ISO 16093:2017 | Machine tools - Safety - Sawing machines for cold metal (ISO 16093:2017) | C - | 01/01/2021 |
| EN ISO 16119-1:2013 | Agricultural and forestry machinery - Environmental requirements for sprayers - Part 1: General (ISO 16119-1:2013) | C - | 01/01/2021 |
| EN ISO 16119-2:2013 | Agricultural and forestry machinery - Environmental requirements for sprayers - Part 2: Horizontal boom sprayers (ISO 16119-2:2013, Corrected version 2017-03) | C - | 01/01/2021 |
| EN ISO 16119-3:2013 | Agricultural and forestry machinery - Environmental requirements for sprayers - Part 3: Sprayers for bush and tree crops (ISO 16119-3:2013) | C - | 01/01/2021 |
| EN ISO 16119-4:2014 | Agricultural and forestry machinery - Environmental requirements for sprayers - Part 4: Fixed and semi-mobile sprayers (ISO 16119-4:2014) | C - | 01/01/2021 |
| EN 16191:2014 | Tunnelling machinery - Safety requirements | C - | 01/01/2021 |
| EN 16203:2014 | Safety of Industrial Trucks - Dynamic tests for verification of lateral stability - Counterbalanced Trucks | C - | 01/01/2021 |
| EN 16228-1:2014 | Drilling and foundation equipment - Safety - Part 1: Common requirements | C - | 01/01/2021 |
| EN 16228-2:2014 | Drilling and foundation equipment - Safety - Part 2: Mobile drill rigs for civil and geotechnical engineering, quarrying and mining | C - | 01/01/2021 |
| EN 16228-3:2014 | Drilling and foundation equipment - Safety - Part 3: Horizontal directional drilling equipment (HDD) | C - | 01/01/2021 |
| EN 16228-4:2014 | Drilling and foundation equipment - Safety - Part 4: Foundation equipment | C - | 01/01/2021 |
| EN 16228-5:2014 | Drilling and foundation equipment - Safety - Part 5: Diaphragm walling equipment | C - | 01/01/2021 |
| EN 16228-6:2014 | Drilling and foundation equipment - Safety - Part 6: Jetting, grouting and injection equipment | C - | 01/01/2021 |
| EN 16228-7:2014 | Drilling and foundation equipment - Safety - Part 7: Interchangeable auxiliary equipment | C - | 01/01/2021 |
| EN 16230-1:2013+A1:2014 | Leisure karts - Part 1: Safety requirements and test methods for karts | C - | 01/01/2021 |
| EN ISO 16230-1:2015 | Agricultural machinery and tractors - Safety of higher voltage electrical and electronic components and systems - Part 1: General requirements (ISO 16230-1:2015) | C - | 01/01/2021 |
| EN ISO 16231-1:2013 | Self-propelled agricultural machinery - Assessment of stability - Part 1: Principles (ISO 16231-1:2013) | C - | 01/01/2021 |
| EN ISO 16231-2:2015 | Self-propelled agricultural machinery - Assessment of stability - Part 2: Determination of static stability and test procedures (ISO 16231-2:2015) | C - | 01/01/2021 |
| EN 16246:2012 | Agricultural machinery - Backhoes - Safety | C - | 01/01/2021 |
| EN 16252:2012 | Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements | C - | 01/01/2021 |
| EN 16307-1:2013+A1:2015 | Industrial trucks - Safety requirements and verification - Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks | C - | 01/01/2021 |
| EN 16307-1:2020 | Industrial trucks - Safety requirements and verification - Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks | C - | 04/07/2022 |
| EN 16307-5:2013 | Industrial trucks - Safety requirements and verification - Part 5: Supplementary requirements for pedestrian-propelled trucks | C - | 01/01/2021 |
| EN 16307-6:2014 | Industrial trucks - Safety requirements and verification - Part 6: Supplementary requirements for burden and personnel carriers | C - | 01/01/2021 |
| EN 16327:2014 | Fire-fighting - Positive-pressure proportioning systems (PPPS) and compressed-air foam systems (CAFS) | C - | 01/01/2021 |
| EN 16474:2015 | Plastics and rubber machines - Tyre curing machines - Safety requirements | C - | 01/01/2021 |
| EN 16486:2014 | Machines for compacting waste materials or recyclable fractions - Compactors - Safety requirements | C - | 01/01/2021 |
| EN 16486:2014+A1:2020 | Machines for compacting waste materials or recyclable fractions - Compactors - Safety requirements | C - | 06/08/2022 |
| EN 16500:2014 | Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements | C - | 01/01/2021 |
| EN 16564:2020 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions |
C - | 04/07/2022 |
| EN 16590-3:2014 | Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 3: Series development, hardware and software (ISO 25119-3:2010 modified) | C - | 01/01/2021 |
| EN 16590-4:2014 | Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 4: Production, operation, modification and supporting processes (ISO 25119-4:2010 modified) | C - | 01/01/2021 |
| EN 16712-4:2018 | Portable equipment for projecting extinguishing agents supplied by firefighting pumps - Portable foam equipment - Part 4: High expansion foam generators PN16 | C - | 01/01/2021 |
| EN 16719:2018 | Transport platforms | C - | 01/01/2021 |
| EN 16743:2016 | Food processing machinery - Automatic industrial slicing machines - Safety and hygiene requirements | C - | 01/01/2021 |
| EN 16770:2018 | Safety of woodworking machines - Chip and dust extraction systems for indoor installation - Safety requirements | C - | 01/01/2021 |
| EN 16774:2016 | Safety of machinery - Safety requirements for steel converter and associated equipment | C - | 01/01/2021 |
| EN 16808:2020 | Petroleum, petrochemical and natural gas industries - Safety of machineries - Manual elevators |
C - | 04/07/2022 |
| EN 16851:2017 | Cranes - Light crane systems | C - | 01/01/2021 |
| EN 16851:2017+A1:2020 | Cranes - Light crane systems | C - | 04/07/2022 |
| EN 16952:2018 | Agricultural machinery - Rough-terrain Work Platforms for Orchard’s operations (WPO) - Safety | C - | 01/01/2021 |
| EN 16985:2018 | Spray booths for organic coating material - Safety requirements | C - | 01/01/2021 |
| EN 17059:2018 | Plating and anodizing lines - Safety requirements | C - | 01/01/2021 |
| EN 17067:2018 | Forestry machinery - Safety requirements on radio remote controls | C - | 01/01/2021 |
| EN ISO 17916:2016 | Safety of thermal cutting machines (ISO 17916:2016) | C - | 01/01/2021 |
| EN ISO 18217:2015 | Safety of woodworking machines - Edge-banding machines fed by chain(s) (ISO 18217:2015) | C - | 01/01/2021 |
| EN ISO 19085-1:2017 | Woodworking machines - Safety - Part 1: Common requirements (ISO 19085-1:2017) | C - | 01/01/2021 |
| EN ISO 19085-1:2021 | Woodworking machines - Safety - Part 1: Common requirements (ISO 19085- 1:2021) |
C - | 06/08/2022 |
| EN ISO 19085-2:2017 | Woodworking machines - Safety - Part 2: Horizontal beam panel circular sawing machines (ISO 19085-2:2017, Corrected version 2017-11-01) | C - | 01/01/2021 |
| EN ISO 19085-3:2017 | Woodworking machines - Safety requirements - Part 3: Numerically controlled (NC) boring and routing machines (ISO 19085-3:2017) | C - | 01/01/2021 |
| EN ISO 19085-4:2018 | Woodworking machines - Safety - Part 4: Vertical panel circular sawing machines (ISO 19085-4:2018) | C - | 01/01/2021 |
| EN ISO 19085-5:2017 | Woodworking machines - Safety - Part 5: Dimension saws (ISO 19085-5:2017) | C - | 01/01/2021 |
| EN ISO 19085-6:2017 | Woodworking machines - Safety - Part 6: Single spindle vertical moulding machines ("toupies") (ISO 19085-6:2017) | C - | 01/01/2021 |
| EN ISO 19085-7:2019 | Woodworking machines - Safety - Part 7: Surface planing, thickness planing, combined surface/thickness planing machines (ISO 19085-7:2019) | C - | 01/01/2021 |
| EN ISO 19085-8:2018 | Woodworking machines - Safety - Part 8: Belt sanding and calibrating machines for straight workpieces (ISO 19085-8:2017) | C - | 01/01/2021 |
| EN ISO 19085-9:2020 | Woodworking machines - Safety - Part 9: Circular saw benches (with and without sliding table) (ISO 19085- 9:2019) | C - | 23/09/2021 |
| EN ISO 19085-10:2019, EN ISO 19085-10:2019/A11:2020 |
Woodworking machines - Safety - Part 10: Building site saws (contractor saws) (ISO 19085-10:2018) | C - | 04/07/2022 |
| EN ISO 19085-11:2020 | Woodworking machines - Safety - Part 11: Combined machines (ISO 19085-11:2020) | C - | 23/09/2021 |
| EN ISO 19085-13:2020 | Woodworking machines - Safety - Part 13: Multi-blade rip sawing machines with manual loading and/or unloading (ISO 19085-13:2020) | C - | 23/09/2021 |
| EN ISO 19225:2017 | Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems (ISO 19225:2017) | C - | 01/01/2021 |
| EN ISO 19225:2017, EN ISO 19225:2017/A1:2019 |
Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems (ISO 19225:2017) | C - | 23/09/2021 |
| EN ISO 19296:2018 | Mining - Mobile machines working underground - Machine safety (ISO 19296:2018) | C - | 01/01/2021 |
| EN ISO 19432:2012 | Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven cut-off machines - Safety requirements (ISO 19432:2012) | C - | 01/01/2021 |
| EN ISO 19432-1:2020 | Building construction machinery and equipment - Portable, hand-held, internal combustion engine-driven abrasive cutting machines - Part 1: Safety requirementsfor cut-off machines for centre-mounted rotating abrasive wheels (ISO 19432-1:2020) | C - | 23/09/2021 |
| EN ISO 19932-1:2013 | Equipment for crop protection - Knapsack sprayers - Part 1: Safety and environmental requirements (ISO 19932-1:2013) | C - | 01/01/2021 |
| EN ISO 19932-2:2013 | Equipment for crop protection - Knapsack sprayers - Part 2: Test methods (ISO 19932-2:2013) | C - | 01/01/2021 |
| EN ISO 20361:2015 | Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2015) | C - | 01/01/2021 |
| EN ISO 20361:2019, EN ISO 20361:2019/A11:2020 |
Liquid pumps and pumps units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2019) | C - | 23/09/2021 |
| EN ISO 20430:2020 | Plastics and rubber machines - Injection moulding machines - Safety requirements (ISO 20430:2020) |
C - | 04/07/2022 |
| EN ISO 21904-1:2020 | Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 1: General requirements (ISO 21904-1:2020) | C - | 23/09/2021 |
| EN ISO 22867:2011 | Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2011) | C - | 01/01/2021 |
| EN ISO 22868:2011 | Forestry and gardening machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy) (ISO 22868:2011) | C - | 01/01/2021 |
| EN ISO 22868:2021 | Forestry and gardening machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy) (ISO 22868:2021) |
C - | 06/08/2022 |
| EN ISO 23125:2015 | Machine tools - Safety - Turning machines (ISO 23125:2015, Corrected version 2016-03-15) | C - | 01/01/2021 |
| EN ISO 28139:2009 | Agricultural and forestry machinery - Knapsack combustion-engine-driven mistblowers - Safety requirements (ISO 28139:2009) | C - | 01/01/2021 |
| EN ISO 28881:2013, EN ISO 28881:2013/AC:2013 |
Machine tools - Safety - Electro-discharge machines (ISO 28881:2013) | C - | 01/01/2021 |
| EN ISO 28927-1:2009, EN ISO 28927-1:2009/A1:2017 |
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 1: Angle and vertical grinders (ISO 28927-1:2009) | C - | 01/01/2021 |
| EN ISO 28927-2:2009 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 2: Wrenches, nutrunners and screwdrivers (ISO 28927-2:2009) | C - | 01/01/2021 |
| EN ISO 28927-2:2009, EN ISO 28927-2:2009/A1:2017 |
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 2: Wrenches, nutrunners and screwdrivers (ISO 28927-2:2009) | C - | 01/01/2021 |
| EN ISO 28927-3:2009 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 3: Polishers and rotary, orbital and random orbital sanders (ISO 28927-3:2009) | C - | 01/01/2021 |
| EN ISO 28927-4:2010, EN ISO 28927-4:2010/A1:2018 |
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 4: Straight grinders (ISO 28927-4:2010) | C - | 01/01/2021 |
| EN ISO 28927-5:2009, EN ISO 28927-5:2009/A1:2015 |
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 5: Drills and impact drills (ISO 28927-5:2009) | C - | 01/01/2021 |
| EN ISO 28927-6:2009 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 6: Rammers (ISO 28927-6:2009) | C - | 01/01/2021 |
| EN ISO 28927-7:2009 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 7: Nibblers and shears (ISO 28927-7:2009) | C - | 01/01/2021 |
| EN ISO 28927-8:2009, EN ISO 28927-8:2009/A1:2015 |
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 8: Saws, polishing and filing machines with reciprocating action and saws with oscillating or rotating action (ISO 28927-8:2009) | C - | 01/01/2021 |
| EN ISO 28927-9:2009 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 9: Scaling hammers and needle scalers (ISO 28927-9:2009) | C - | 01/01/2021 |
| EN ISO 28927-10:2011 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 10: Percussive drills, hammers and breakers (ISO 28927-10:2011) | C - | 01/01/2021 |
| EN ISO 28927-11:2011 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 11: Stone hammers (ISO 28927-11:2011) | C - | 01/01/2021 |
| EN ISO 28927-12:2012 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 12: Die grinders (ISO 28927-12:2012) | C - | 01/01/2021 |
| EN ISO/IEC 80079-38:2016, EN ISO/IEC 80079-38:2016/A1:2018 |
Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016) | C - | 01/01/2021 |
| EN 60204-1:2006, EN 60204-1:2006/AC:2010, EN 60204-1:2006/A1:2009 |
Safety of machinery - Electrical equipment of machines - Part 1: General requirements | B - | 01/01/2021 |
| EN 60204-1:2018 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements | B - | 01/01/2021 |
| EN 60204-11:2000, EN 60204-11:2000/AC:2010 |
Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV | B - | 01/01/2021 |
| EN IEC 60204-11:2019 | Safety of machinery - Electrical equipment of machines - Part 11: Requirements for equipment for voltages above 1 000 V AC or 1 500 V DC and not exceeding 36 kV | B - | 01/01/2021 |
| EN 60204-32:2008 | Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines | B - | 01/01/2021 |
| EN 60204-33:2011 | Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment | B - | 01/01/2021 |
| EN 61310-1:2008 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals | B - | 01/01/2021 |
| EN 61310-2:2008 | Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking | B - | 01/01/2021 |
| EN 61310-3:2008 | Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators | B - | 01/01/2021 |
| EN 61800-5-2:2007 | Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional | B - | 01/01/2021 |
| EN 62061:2005, EN 62061:2005/AC:2010, EN 62061:2005/A1:2013, EN 62061:2005/A2:2015 |
Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems | B - | 01/01/2021 |
| EN IEC 62061:2021 | Safety of machinery - Functional safety of safety-related control systems |
B - | 06/08/2022 |
| EN 62745:2017, EN 62745:2017/A11:2020 |
Safety of machinery - Requirements for cableless control systems of machinery | B - | 23/09/2021 |
| EN 50223:2015 | Stationary electrostatic application equipment for ignitable flock material - Safety requirements | C - | 01/01/2021 |
| EN 50348:2010, EN 50348:2010/AC:2010 |
Stationary electrostatic application equipment for non-ignitable liquid coating material - Safety requirements | C - | 01/01/2021 |
| EN 50434:2014 | Safety of household and similar appliances - Particular requirements for mains operated shredders and chippers | C - | 01/01/2021 |
| EN 50569:2013 | Household and similar electrical appliances - Safety - Particular requirements for commercial electric spin extractors | C - | 01/01/2021 |
| EN 50569:2013, EN 50569:2013/A1:2018 |
Household and similar electrical appliances - Safety - Particular requirements for commercial electric spin extractors | C - | 01/01/2021 |
| EN 50570:2013 | Household and similar electrical appliances - Safety - Particular requirements for commercial electric tumble dryers | C - | 01/01/2021 |
| EN 50570:2013, EN 50570:2013/A1:2018 |
Household and similar electrical appliances - Safety - Particular requirements for commercial electric tumble dryers | C - | 01/01/2021 |
| EN 50571:2013 | Household and similar electrical appliances - Safety - Particular requirements for commercial electric washing machines | C - | 01/01/2021 |
| EN 50571:2013, EN 50571:2013/A1:2018 |
Household and similar electrical appliances - Safety - Particular requirements for commercial electric washing machines | C - | 01/01/2021 |
| EN 50580:2012, EN 50580:2012/A1:2013 |
Safety of hand-held electric motor operated tools - Particular requirements for spray guns | C - | 01/01/2021 |
| EN 50636-2-91:2014 | Household and similar electrical appliances - Safety - Part 2-91: Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers | C - | 01/01/2021 |
| EN 50636-2-92:2014 | Household and similar electrical appliances - Safety - Part 2-92: Particular requirements for pedestrian-controlled mains-operated lawn scarifiers and aerators | C - | 01/01/2021 |
| EN 50636-2-94:2014 | Household and similar electrical appliances - Safety - Part 2-94: Particular requirements for scissors type grass shears | C - | 01/01/2021 |
| EN 50636-2-100:2014 | Household and similar electrical appliances - Safety - Part 2-100: Particular requirements for hand-held mains-operated garden blowers, vacuums and blower vacuums | C - | 01/01/2021 |
| EN 50636-2-107:2015, EN 50636-2-107:2015/A1:2018 |
Safety of household and similar appliances - Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers | C - | 01/01/2021 |
| EN 50636-2-107:2015, EN 50636-2-107:2015/A1:2018, EN 50636-2-107:2015/A2:2020 |
Safety of household and similar appliances - Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers | C - | 23/09/2021 |
| EN 50636-2-107:2015, EN 50636-2-107:2015/A1:2018, EN 50636-2-107:2015/A2:2020, EN 50636-2-107:2015/A3:2021 |
Safety of household and similar appliances - Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers | C - | 06/08/2022 |
| EN 60204-31:2013 | Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems | C - | 01/01/2021 |
| EN 60335-1:2012, EN 60335-1:2012/AC:2014, EN 60335-1:2012/A11:2014, EN 60335-1:2012/A13:2017 |
Household and similar electrical appliances - Safety - Part 1: General requirements | C - | 01/01/2021 |
| EN 60335-1:2012, EN 60335-1:2012/AC:2014, EN 60335-1:2012/A11:2014, EN 60335-1:2012/A13:2017, EN 60335-1:2012/A15:2021 |
Household and similar electrical appliances - Safety - Part 1: General requirements | C - | 06/08/2022 |
| EN 60335-2-8:2015, EN 60335-2-8:2015/A1:2016 |
Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances | C - | 01/01/2021 |
| EN 60335-2-23:2003, EN 60335-2-23:2003/A2:2015 |
Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for appliances for skin or hair care | C - | 01/01/2021 |
| EN 60335-2-36:2002, EN 60335-2-36:2002/A11:2012, EN 60335-2-36:2002/AC:2007 |
Household and similar electrical appliances - Safety - Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements | C - | 01/01/2021 |
| EN 60335-2-37:2002, EN 60335-2-37:2002/A11:2012, EN 60335-2-37:2002/AC:2007, EN 60335-2-37:2002/A12:2016 |
Household and similar electrical appliances - Safety - Part 2-37: Particular requirements for commercial electric deep fat fryers | C - | 01/01/2021 |
| EN 60335-2-40:2003, EN 60335-2-40:2003/A11:2004, EN 60335-2-40:2003/A12:2005, EN 60335-2-40:2003/A1:2006, EN 60335-2-40:2003/A13:2012/AC:2013, EN 60335-2-40:2003/A13:2012, EN 60335-2-40:2003/A2:2009, EN 60335-2-40:2003/AC:2006, EN 60335-2-40:2003/AC:2010 |
Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers | C - | 01/01/2021 |
| EN 60335-2-42:2003, EN 60335-2-42:2003/A11:2012, EN 60335-2-42:2003/AC:2007 |
Household and similar electrical appliances - Safety - Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens | C - | 01/01/2021 |
| EN 60335-2-47:2003, EN 60335-2-47:2003/A11:2012, EN 60335-2-47:2003/AC:2007 |
Household and similar electrical appliances - Safety - Part 2-47: Particular requirements for commercial electric boiling pans | C - | 01/01/2021 |
| EN 60335-2-48:2003, EN 60335-2-48:2003/A11:2012, EN 60335-2-48:2003/AC:2007 |
Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toasters | C - | 01/01/2021 |
| EN 60335-2-49:2003, EN 60335-2-49:2003/A11:2012, EN 60335-2-49:2003/AC:2007 |
Household and similar electrical appliances - Safety - Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm | C - | 01/01/2021 |
| EN 60335-2-58:2005, EN 60335-2-58:2005/A12:2016, EN 60335-2-58:2005/A2:2015 |
Household and similar electrical appliances - Safety - Part 2-58: Particular requirements for commercial electric dishwashing machines | C - | 01/01/2021 |
| EN 60335-2-65:2003, EN 60335-2-65:2003/A11:2012 |
Household and similar electrical appliances - Safety - Part 2-65: Particular requirements for air-cleaning appliances | C - | 01/01/2021 |
| EN 60335-2-67:2012 | Household and similar electrical appliances - Safety - Part 2-67: Particular requirements for floor treatment machines for commercial use | C - | 01/01/2021 |
| EN 60335-2-68:2012 | Household and similar electrical appliances - Safety - Part 2-68: Particular requirements for spray extraction machines, for commercial use | C - | 01/01/2021 |
| EN 60335-2-69:2012 | Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush for commercial use | C - | 01/01/2021 |
| EN 60335-2-72:2012 | Household and similar electrical appliances - Safety - Part 2-72: Particular requirements for floor treatment machines with or without traction drive, for commercial use | C - | 01/01/2021 |
| EN 60335-2-77:2010 | Safety of household and similar appliances - Part 2-77: Particular requirements for pedestrian-controlled walk-behind electrically powered lawn mowers | C - | 01/01/2021 |
| EN 60335-2-79:2012 | Household and similar electrical appliances - Safety - Part 2-79: Particular requirements for high pressure cleaners and steam cleaners | C - | 01/01/2021 |
| EN 60335-2-89:2010, EN 60335-2-89:2010/A1:2016, EN 60335-2-89:2010/A2:2017 |
Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor | C - | 01/01/2021 |
| EN 60335-2-95:2015, EN 60335-2-95:2015/A1:2015 |
Household and similar electrical appliances - Safety - Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use | C - | 01/01/2021 |
| EN 60335-2-97:2006, EN 60335-2-97:2006/A12:2015 |
Household and similar electrical appliances - Safety - Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment | C - | 01/01/2021 |
| EN 60335-2-102:2016 | Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections | C - | 01/01/2021 |
| EN 60335-2-103:2015 | Household and similar electrical appliances - Safety - Part 2-103: Particular requirements for drives for gates, doors and windows | C - | 01/01/2021 |
| EN 60519-1:2015 | Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements | C - | 01/01/2021 |
| EN 60745-1:2009, EN 60745-1:2009/AC:2009, EN 60745-1:2009/A11:2010 |
Hand-held motor-operated electric tools - Safety - Part 1: General requirements | C - | 01/01/2021 |
| EN 60745-2-1:2010 | Hand-held motor-operated electric tools - Safety - Part 2-1: Particular requirements for drills and impact drills | C - | 01/01/2021 |
| EN 60745-2-3:2011, EN 60745-2-3:2011/A2:2013, EN 60745-2-3:2011/A11:2014, EN 60745-2-3:2011/A12:2014, EN 60745-2-3:2011/A13:2015 |
Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders | C - | 01/01/2021 |
| EN 60745-2-6:2010 | Hand-held motor-operated electric tools - Safety - Part 2-6: Particular requirements for hammers | C - | 01/01/2021 |
| EN 60745-2-12:2009 | Hand-held motor-operated electric tools - Safety - Part 2-12: Particular requirements for concrete vibrators | C - | 01/01/2021 |
| EN 60745-2-13:2009, EN 60745-2-13:2009/A1:2010 |
Hand-held motor-operated electric tools - Safety - Part 2-13: Particular requirements for chain saws | C - | 01/01/2021 |
| EN 60745-2-15:2009, EN 60745-2-15:2009/A1:2010 |
Hand-held motor-operated electric tools - Safety - Part 2-15: Particular requirements for hedge trimmers | C - | 01/01/2021 |
| EN 60745-2-16:2010 | Hand-held motor-operated electric tools - Safety - Part 2-16: Particular requirements for tackers | C - | 01/01/2021 |
| EN 60745-2-17:2010 | Hand-held motor-operated electric tools - Safety - Part 2-17: Particular requirements for routers and trimmers | C - | 01/01/2021 |
| EN 60745-2-18:2009 | Hand-held motor-operated electric tools - Safety - Part 2-18: Particular requirements for strapping tools | C - | 01/01/2021 |
| EN 60745-2-19:2009, EN 60745-2-19:2009/A1:2010 |
Hand-held motor-operated electric tools - Safety - Part 2-19: Particular requirements for jointers | C - | 01/01/2021 |
| EN 60745-2-20:2009 | Hand-held motor-operated electric tools - Safety - Part 2-20: Particular requirements for band saws | C - | 01/01/2021 |
| EN 60745-2-21:2009, EN 60745-2-21:2009/A1:2010 |
Hand-held motor-operated electric tools - Safety - Part 2-21: Particular requirements for drain cleaners | C - | 01/01/2021 |
| EN 60745-2-22:2011, EN 60745-2-22:2011/A11:2013 |
Hand-held motor-operated electric tools - Safety - Part 2-22: Particular requirements for cut-off machines | C - | 01/01/2021 |
| EN 60745-2-23:2013 | Hand-held motor-operated electric tools - Safety - Part 2-23: Particular requirements for die grinders and small rotary tools | C - | 01/01/2021 |
| EN 60947-5-3:2013 | Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB) | C - | 01/01/2021 |
| EN 60947-5-5:1997, EN 60947-5-5:1997/A1:2005, EN 60947-5-5:1997/A11:2013, EN 60947-5-5:1997/A2:2017 |
Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function | C - | 01/01/2021 |
| EN 61029-1:2009, EN 61029-1:2009/AC:2009, EN 61029-1:2009/A11:2010 |
Safety of transportable motor-operated electric tools - Part 1: General requirements | C - | 01/01/2021 |
| EN 61029-2-3:2011 | Safety of transportable motor-operated electric tools - Part 2-3: Particular requirements for planers and thicknessers | C - | 01/01/2021 |
| EN 61029-2-5:2011, EN 61029-2-5:2011/A11:2015 |
Safety of transportable motor-operated electric tools - Part 2-5: Particular requirements for band saws | C - | 01/01/2021 |
| EN 61029-2-8:2010 | Safety of transportable motor-operated electric tools - Part 2-8: Particular requirements for single spindle vertical moulders | C - | 01/01/2021 |
| EN 61029-2-11:2012, EN 61029-2-11:2012/A11:2013 |
Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for combined mitre and bench saws | C - | 01/01/2021 |
| EN 61029-2-12:2011 | Safety of transportable motor-operated electric tools - Part 2-12: Particular requirements for threading machines | C - | 01/01/2021 |
| EN 62841-1:2015, EN 62841-1:2015/AC:2015 |
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: General requirements | C - | 01/01/2021 |
| EN 62841-2-1:2018 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1: Particular requirements for hand-held drills and impact drills | C - | 01/01/2021 |
| EN 62841-2-1:2018, EN 62841-2-1:2018/A11:2019 |
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1: Particular requirements for hand-held drills and impact drills | C - | 01/01/2021 |
| EN 62841-2-2:2014, EN 62841-2-2:2014/AC:2015 |
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-2: Particular requirements for hand-held screwdrivers and impact wrenches (IEC 62841-2-2:2014, modified) | C - | 01/01/2021 |
| EN 62841-2-4:2014, EN 62841-2-4:2014/AC:2015 |
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type (IEC 62841-2-4:2014, modified) | C - | 01/01/2021 |
| EN 62841-2-5:2014 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-5: Particular requirements for hand-held circular saws (IEC 62841-2-5:2014, modified) | C - | 01/01/2021 |
| EN IEC 62841-2-6:2020, EN IEC 62841-2-6:2020/A11:2020 |
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-6: Particular requirements for hand-held hammers | C - | 04/07/2022 |
| EN 62841-2-8:2016 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-8: Particular requirements for hand-held shears and nibblers | C - | 01/01/2021 |
| EN 62841-2-9:2015, EN 62841-2-9:2015/AC:2016-10 |
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-9: Particular requirements for hand-held tappers and threaders | C - | 01/01/2021 |
| EN 62841-2-10:2017 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-10: Particular requirements for hand-held mixers | C - | 01/01/2021 |
| EN 62841-2-11:2016 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws | C - | 01/01/2021 |
| EN 62841-2-11:2016, EN 62841-2-11:2016/A1:2020 |
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws | C - | 23/09/2021 |
| EN 62841-2-14:2015 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-14: Particular requirements for hand-held planers | C - | 01/01/2021 |
| EN 62841-2-17:2017 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-17: Particular requirements for hand-held routers | C - | 01/01/2021 |
| EN 62841-2-21:2019 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-21: Particular requirements for hand-held drain cleaners | C - | 01/01/2021 |
| EN 62841-3-1:2014, EN 62841-3-1:2014/AC:2015, EN 62841-3-1:2014/A11:2017 |
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1:2014, modified) | C - | 01/01/2021 |
| EN 62841-3-4:2016, EN 62841-3-4:2016/A11:2017 |
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders | C - | 01/01/2021 |
| EN 62841-3-4:2016, EN 62841-3-4:2016/A11:2017, EN 62841-3-4:2016/A12:2020, EN 62841-3-4:2016/A1:2020 |
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders | C - | 23/09/2021 |
| EN 62841-3-6:2014, EN 62841-3-6:2014/AC:2015, EN 62841-3-6:2014/A11:2017 |
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-6: Particular requirements for transportable diamond drills with liquid system (IEC 62841-3-6:2014, modified) | C - | 01/01/2021 |
| EN 62841-3-9:2015, EN 62841-3-9:2015/AC:2016-09, EN 62841-3-9:2015/A11:2017 |
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws | C - | 01/01/2021 |
| EN IEC 62841-3-9:2020, EN IEC 62841-3-9:2020/A11:2020 |
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws | C - | 23/09/2021 |
| EN 62841-3-10:2015, EN 62841-3-10:2015/AC:2016-07, EN 62841-3-10:2015/A11:2017 |
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-10: Particular requirements for transportable cut-off machines | C - | 01/01/2021 |
| EN 62841-3-12:2019 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-12: Particular requirements for transportable threading machines | C - | 01/01/2021 |
| EN 62841-3-13:2017 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-13: Particular requirements for transportable drills | C - | 01/01/2021 |
| EN 62841-3-14:2017 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-14: Particular requirements for transportable drain cleaners | C - | 01/01/2021 |
| EN 62841-4-1:2020 | Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 4-1: Particular requirements for chain saws | C - | 23/09/2021 |
| EN 62841-4-2:2019 | C - | 01/01/2021 |